8.5

Included Effect Plug-ins
Dynamics Plug-ins
51
Frequency Band Editor
The frequency band editor in the upper half of the panel is where you set the width
of the frequency bands as well as their level after compression. The vertical value
scale to the left shows the gain level of each frequency band. The horizontal scale
shows the available frequency range.
• To define the frequency range of the different frequency bands, use the
h
andles at the sides of each frequency band.
• To attenuate or boost the gain of the frequency bands by ±15 dB after
c
ompression, use the handles at the top of each frequency band.
Live
If this button is activated, the look-ahead fe
ature of the effect is deactivated.
Look-ahead produces more accurate processing, but adds a certain amount
of latency as a trade-off. If Live mode is activated, there is no latency, which
is better for live processing.
Bypassing Frequency Bands
To bypass each frequency band, activate the Bypass Band button
in each
section.
Soloing Frequency Bands
To solo a frequency band, activate the S b
utton in each section. Only one
band can be soloed at a time.