User manual

432
Track Quick Controls
Connecting quick controls with remote controllers
Automatic assignment of VST instrument parameters
When you create an instrument track or load a VST instrument via the VST
Instruments window (including creating an associated MIDI track), the main
parameters of the instrument are automatically assigned to the slots on the Quick
Controls tab in the Inspector (if the VST instrument supports this feature).
• To retrieve the default assignments for the main parameters of the VST instrument,
click the “Get Default QCs from Plug-in” button on the Inspector tab.
This is useful if you have changed the parameter assignment or if you manually
route a MIDI track to a VST instrument.
Removing parameter assignments
• To remove a parameter from a slot, double-click the parameter name to select it
and press the [Delete] or [Backspace] key. Confirm by pressing [Return].
• Alternatively, you can click in the corresponding slot and select “No parameter”
from the pop-up menu.
• To remove the quick control assignments for all slots, click the “Remove All QC
Assignments” button.
Connecting quick controls with remote controllers
Quick controls become really powerful when used in combination with a remote
controller. Setting up the connection between the slots on the Quick Controls
Inspector tab and a remote control device is easy.
Proceed as follows:
1. In Cubase, open the Device Setup dialog from the Devices menu.
2. In the Devices list on the left, select the Quick Controls option.
This will open the Quick Controls section on the right of the dialog: