User Manual

ManualsBrandsSteinberg ManualsMusical InstrumentsUR44 B-Stock - 6x4 USB / MIDI AUDIO INTERFACE

Software

UR44 Operation Manual 18

Sweet Spot Morphing Channel

Strip (Compressor and Equalizer)

Overview

The Sweet Spot Morphing Channel Strip (“Channel

Strip” for short) is a multi-effect that combines

compression and EQ. Advanced sound engineering

know-how is condensed into a number of

convenient presets that can be simply and instantly

recalled, for professional results.

Four channel strips are provided, and each can be

assigned to the monitor sound only, or to both the

monitor and recorded sound.

The Channel Strip equipped with the device and the

Channel Strip of the VST Plug-in version have the

same parameters. When using the Channel Strip on

Cubase series programs, you can share the settings

between the built-in Channel Strip and the Channel

Strip of the VST Plug-in version as a preset file.

When using the built-in Channel Strip on Cubase

series programs, turn on the “Direct Monitoring”

setting in the program. Also, when assigning the

Channel Strip of the VST Plug-in version to the effect

slot on Cubase series programs, select it from the

“Dynamics” category (in the case of the default

settings). Please note that you cannot use the built-

in Channel Strip when the sample rate is set to

176.4 kHz or 192 kHz.

How to Open the Window

From Dedicated Windows for Cubase Series

Select the “Channel Strip” from the “Effect Type”,

then click “Channel Strip Edit” in the section “Input

Settings Window” (page 16).

From dspMixFx UR44

Select the “Channel Strip” from the “Effect Type”,

then click “Channel Strip Edit” in the section

“Channel Area” (page 12).

Controls and Functions

Common to Compressor and Equalizer

1 MORPH

Adjusts the parameter of the Sweet Spot Data. You can

simultaneously adjust the compressor and equalizer

settings which are set to five points around this knob

by turning this knob. When you set the knob to the

middle of adjacent two points, the compressor and

equalizer settings will be set to an intermediate value.

2 Sweet Spot Data

Selects the Sweet Spot Data.

3 TOTAL GAIN

Adjusts the total gain of the Channel Strip.

Range: -18.0 dB – +18.0 dB

4 Level Meter

Indicates the output level of the Channel Strip.

Compressor

5 ATTACK

Adjusts the attack time of the compressor.

Range: 0.092 msec – 80.00 msec

6 RELEASE

Adjusts the release time of the compressor.

Range: 9.3 msec – 999.0 msec

)