Datasheet

ManualsBrandsSTEGO ManualsFan HeatersHeater 45...150 W 60x220x70 mm

STEGO - PRODUCT CATALOGUE

Art. No. Heating capacity² Inrush current max. Recommended pre-fuse T (time-delay) Length (L) Weight (approx.)

14000.0-00 15 W 1.5 A 2.0 A 65 mm 0.3 kg

14001.0-00 30 W 3.0 A 4.0 A 65 mm 0.3 kg

14003.0-00 45 W 3.5 A 4.0 A 65 mm 0.3 kg

14005.0-00 60 W 2.5 A 4.0 A 140 mm 0.4 kg

14006.0-00 75 W 4.0 A 6.3 A 140 mm 0.5 kg

14007.0-00 100 W 4.5 A 8.0 A 140 mm 0.5 kg

14008.0-00 150 W 9.0 A 10.0 A 220 mm 0.7 kg

² at +20 °C (+68 °F) ambient temperature

These heaters are used in enclosures where damage from condensation must be prevented, or where the tempe

rature

may not fall below a minimum value. The aluminium proﬁle heater body design has a chimney effect and distri

butes

the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and

simplify installation.

> Pressure clamp connectors

> Dynamic heating up

> Wide voltage range

> Energy saving

> Clip ﬁxing

> Quick installation

TECHNICAL DATA

Operating voltage AC/DC 120 – 240 V¹ (min. 110 V, max. 265 V)

Heating element PTC resistor – temperature limiting

Heater body extruded aluminium proﬁle, anodised

Connection 3 pressure clamps for stranded wire 0.5 – 1.5 mm² (with wire

end ferrule) and rigid wire 0.5 – 2.5 mm²

Connection casing plastic according to UL94 V-0, black

Mounting clip for 35 mm DIN rail, EN 60715

Fitting position vertical airﬂow (air outlet up, connection on bottom)

Operating/Storage temperature -45 to +70 °C (-49 to +158 °F)

Operating/Storage humidity max. 90 % RH (non-condensing)

Protection type/Protection class IP20 / I (earthed)

Approvals VDE, UL File No. E150057, EAC

Accessoires screw ﬁxing, Art. No. 09024.0-00 (1 packing unit = 2 pieces)

Note other voltages on request

¹ Operating with voltages below AC/DC 140 V reduces heating performance by approx. 10 %.

SEMICONDUCTOR HEATER

HG 140 | 15 W to 150 W

HEATING

04.04.2017 | Speciﬁcations are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its ﬁnal application.

www.stego.de | www.stego.co.uk | www.stegonorden.se

TECHNICAL DATASHEET