MSDS

ManualsBrandsSteel Meister ManualsCleaning8 oz. Stainless Steel Spot Cleaner

M A T E R I A L S A F E T Y D A T A S H E E T

L-15247 Page: 1

============== SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION ==============

PRODUCT NAME: STEEL MEISTER SPOT CLEANER

PRODUCT CODE: L-15247

MANUFACTURER'S NAME: CHICAGO AEROSOL - BRIDGEVIEW FACILITY

ADDRESS : 8407 S. 77th Avenue

Bridgeview, IL 60455

EMERGENCY PHONE : 708-598-7100

INFORMATION PHONE : 708-598-7100

==================== SECTION 2 - HAZARDS IDENTIFICATION ====================

INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE

RESPIRATORY IRRITATION, HEADACHE, NAUSEA, FATIGUE, DROWSINESS, IMPAIRED CO-

ORDINATION.

SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE

SKIN: CONTACT MAY DRY THE SKIN; PROLONGED CONTACT MAY CAUSE IRRITATION. EYES:

LIQUID OR VAPOR CAN IRRITATE.

SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE

CAN BE ABSORBED. SOLVENT ACTION CAN DRY AND DEFAT THE SKIN CAUSING THE SKIN TO

CRACK, LEADING TO DERMATITIS.

INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE

NOT A LIKELY ROUTE OF EXPOSURE. IF SWALLOWED, DO NOT INDUCE VOMITING. SEEK

IMMEDIATE MEDICAL ADVICE AND/OR ATTENTION.

HEALTH HAZARDS (ACUTE AND CHRONIC)

ACUTE: EYE IRRITANT. SKIN IRRITANT. CHRONIC: UNKNOWN.

CARCINOGENICITY: NTP CARCINOGEN: No IARC MONOGRAPHS: No OSHA REGULATED: No

MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE

NONE KNOWN.

============ SECTION 3 - COMPOSITION/INFORMATION ON INGREDIENTS ============

VAPOR PRESSURE WEIGHT

REPORTABLE COMPONENTS CAS NUMBER mm Hg @ TEMP PERCENT

--------------------------------------------------------------------------------

BUTANE 106-97-8 1640 68 4

OSHA PEL: 800 PPM, ACGIH TLV: 800 PPM

PROPANE 74-98-6 6350 68 0

OSHA PEL: 1000 PPM, ACGIH TLV: ASPHYXIANT

*** No toxic chemical(s) subject to the reporting requirements of section 313

of Title III and of 40 CFR 372 are present. ***

======================== SECTION 4 - FIRST AID MEASURES ====================

EMERGENCY AND FIRST AID PROCEDURES

INHALATION: REMOVE TO FRESH AIR. ADMINISTER OXYGEN IF NEEDED. APPLY ARTIFICIAL

RESPIRATION IF BREATHING HAS STOPPED. GET MEDICAL ATTENTION. SKIN: WIPE OFF WITH

TOWEL. WASH WITH SOAP AND WATER. GET MEDICAL ATTENTION IF IRRITATION PERSISTS.

EYES: WASH IMMEDIATELY WITH LARGE VOLUMES OF FRESH WATER FOR AT LEAST 15

MINUTES. GET MEDICAL ATTENTION.

====================== SECTION 5 - FIRE FIGHTING MEASURES ==================

Summary of content (3 pages)

PAGE 1
M A T E R I A L S A F E T Y D A T A S H E E T L-15247 Page: ============== SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION 1 ============== PRODUCT NAME: STEEL MEISTER SPOT CLEANER PRODUCT CODE: L-15247 MANUFACTURER'S NAME: CHICAGO AEROSOL - BRIDGEVIEW FACILITY ADDRESS : 8407 S.
PAGE 2
M A T E R I A L S A F E T Y D A T A S H E E T L-15247 Page: 2 FLASH POINT: -76 F METHOD USED: TOC FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: 1.9 UPPER: 8.4 EXTINGUISHING MEDIA: FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG SPECIAL FIREFIGHTING PROCEDURES WATER SPRAY MAY BE INEFFECTIVE. WATER MAY BE USED TO COOL CONTAINERS TO PREVENT PRESSURE BUILD-UP AND EXPLOSION WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG NOZZLES PREFERRED. WEAR GOGGLES AND SELF-CONTAINED BREATHING APPARATUS.
PAGE 3
M A T E R I A L S A F E T Y D A T A S H E E T L-15247 Page: 3 EYE WASHES AND SAFETY SHOWERS IN THE WORKPLACE ARE RECOMMENDED. ================= SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES BOILING RANGE: 31 F - 212 F VAPOR DENSITY: UNKNOWN SOLUBILITY IN WATER: COMPLETE APPEARANCE AND ODOR: AEROSOL PRODUCT ================= SECTION 10 - SPECIFIC GRAVITY (H2O=1): EVAPORATION RATE: UNKNOWN STABILITY AND REACTIVITY ============= 0.