Owner Manual
Table Of Contents
- Prologue
- User Instructions
- Choosing the Right Location
- Installation Drawing of Steam Generator
- Plumbing Installation
- Steam Generator Specifications
- Electrical Requirements
- Assembly Graph for Power Wire
- Installation of the Top light
- Steam generator DISSECTION DIAGRAM
- Care & Use for the control panel
- Controller Box Content
- Control Panel Installation instructions
- Testing the Machine
- Control Panel Diagram
- Control panel operation
- Steam Generator Maintenance
- Technical Parameters
- Wiring Diagrams
SteamSpa PHONE: 800-856-0172 FAX: 866-560-1060 http://steamspa.com info@steamspa.com
Page 3
INSTALLATION & USER GUIDE
IMPORTANT WARRANTY INFORMATION!
The installation of a quick release and pressure reduction system is essential to the care and
maintenance of your steam bath generator unit. Additionally, the use of an inline water filter with
fresh cartridges prevents mineral deposit and built up from damaging the generator’s internal
plumbing and compnents.
Please be advised failure to comply with any of the following will VOID the warranty.
1. The User must register product within 90 days of delivery. See www.SteamSpa.com/register.
2. Installation must be performed by a licensed professional.
3. A quick release & pressure reducing valve must be used for reliable periotic maintenance.
4. An inline water filter must be installed to prevent mineral deposit and build up.
5. Filter cartridge must be replaced no later than every 6 months.
Malfunctions, damages, parts replacement and labor resulting from improper installation,
negligence, or lack of care and maintenance will NOT be covered under the SteamSpa
Warranty.
For more information visit www.SteamSpa.com/warranty or call 1-800-856-0172.
Quick Connect Kit
STMKIT
Replaceable Filter
Cartridges
G-STEAMFILT-CAR
Inline Water Filter
G-STEAMFILT
1
2
3
STEAM QUICK RELEASE & PRESSURE REDUCTION KIT
w/ WATER FILTER PLUS EXTRA CARTRIDGES
STMKIT-02