User Manual
Table Of Contents
- Warning Statements
- Product Diagram
- Product Information
- Package Contents
- Requirements
- Grounding the Wall-Mount Enclosure
- Locking or Unlocking the Front Door
- Removing the Side Panels
- Replacing the Side Panels
- Removing the Cable Access Cover
- Replacing the Cable Access Cover
- Reversing the Front Door
- Adjust the Depth of the Mounting Rails
- Use the Mounting Rail Tapped Holes
- Mount the Enclosure to the Wall
- Installing Equipment
19
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Adjusting the Mounting Rails
Use the Mounting Rail Tapped Holes
The Mounting Rails come pre installed with the Cage Nut
Holes facing outward. However, the Mounting Rails can be
adjusted so that you can use the Tapped Holes to install your
equipment.
Warning! Remove all equipment before adjusting the
Mounting Rails.
1. Use a Phillips Head Screwdriver to remove the Screw and
Cage Nut located in the upper and lower corners of the
Mounting Rails.
2. Change the location of the Mounting Rails so that the sides
of the Mounting Rails with the Tapped Holes are facing the
Front Door.