User Manual

Instruction manual
14
4. Line up the adapter brackets with the mounting holes on the back of the TV.
5. Place the rectangular washers over the adapter brackets.
6. Insert the M6x30 mm screws, M8x30 mm screws, or the M8x50 mm screws
through the rectangular washers, adapter brackets, spacers, and into the back of
the TV.
7. Use a Phillips screwdriver to tighten the screws. (gure 8)
Warning! Do not over-tighten the screws. If you encounter resistance while you’re
tightening the screws, stop tightening. Failure to do so could result in damage to
the TV.
gure 8
Adapter bracket
Spacers
Rectangular washer
M6x30 mm screw
M8x30 mm screw
M8x50 mm screw