User Manual

12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
13. Slide a Center Section Assembly between the top of the
Vertical Rails on the left-hand side of the Rack.
14. Slide a Center Section Assembly between the top of the
Vertical Rails on the right-hand side of the Rack.
15. Place one Top Bracket on the top front side of the Rack.
(Figure 6)
16. Place a second Top Bracket on the top rear side of the Rack.
17. Insert eight M8 Bolts through eight M8 Washers and into
the holes in the Top Brackets and the tops of the Vertical
Rails. (Figure 7)
18. Tighten the M8 Bolts using the 13 mm Wrench.
Figure 6