DJC.
IMPORTANT SAFETY INSTRUCTIONS CAUTION: THE LIGHTNING FLASH WITH AN ARROWHEAD SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UN-INSULATED DANGEROUS VOLTAGE WITHIN THE UNITS ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT. ENGLISH: The apparatus shall be connected to a Mains socket outlet with a protective earthing connection. GERMAN: Das Gerät ist eine Wandsteckdose mit einem Erdungsleiter angeschlossen werden. FRENCH: L’appareil doit être connecté à une prise secteur avec connexion à la terre. SPANISH: El aparato estará conectado a una toma de red eléctrica con una conexión a tierra.
Features Thank you for purchasing your new DJC.4 MIDI controller! The DJC.4 comes bundled with a four-deck version of Virtual DJ® LE, which allows users to scratch and mix four decks of audio as well as control video. Its built-in audio interface allows users to integrate turntables or CD decks into their performance. The control surface of the DJC.4 features large, touch-sensitive jog wheels, offering users extremely tight scratch and pitch bend control. Setup of the DJC.4 is easy.
Specifications 1. GENERAL SECTION POWER : DC6V, 2.0A DIMENSION : 410 (W) X 297 (D) X 65 (H) mm WEIGHT : 2.9 kg 2. INPUT/OUTPUT IMPEDANCE & SENSITIVITY: (MAXIMUM GAIN, load=100K) INPUT IMPEDANCE AND REFERENCE INPUT LEVEL LINE: 47K OHM /0dBV PHONO: 47K OHM /-50dBV MIC: 10K OHM /-54dBV AUX: 47K OHM /0dBV OUTPUT IMPEDANCE MASTER: 300 OHM BALANCED: 600 OHM PHONES (load=32 ohm): 10 OHM 3. FREQUENCY RESPONSE: (MASTER GAIN MAX.
Controls and Functions FADER FX 1. 2. 3. 4. 5. Input 1 LED To avoid speaker damage that may be caused by excessive volume, be sure to turn the Master Volume Control knob to Indicates when INPUT 1 THRU is active. 0 before turning on your DJC.4. When the INPUT 1 over 2V the PEAK LED will light. Mic LED SAMPLER VOLUME Indicates the MIC is active. Input 1 Source Switch Switches between AUX or LINE/PHONO. Input 2 Source Switch Switches between MIC or LINE/PHONO2.
Controls and Functions 1. Power Connector A DC adaptor can be used when the USB port cannot provide enough power to the unit. Please use only a 6V DC adaptor. 2. ON/OFF Switch Turns the DJC.4 ON/OFF. 3. USB Port Connects your DJC.4 to your computer for both audio and power. Note: maximum USB cable length is 3 meters. 4. Balanced TRS Master Output Jack For connection to a professional amplifier or mixing console with a balanced input. 5.
Controls and Functions CHANNEL FX CONTROL (FADER FX Control Changes Line Faders to FX Controls) CHANNEL EQ CONTROL CHANNEL C (Labeled Shift Function for Key/Filter) ON QUICK LOOP ACCESS LOOP LENGTH ÷ FFADER FX x SAMPLER VOLUME PITCH/TEMPO 0% SAMPLER BEAT LOCK REVERSE SMART A/C B/D FX CTRL 1 JOG WHEEL (PITCH/SCRATCH) SHIFT BUTTON SMART FADE (Engages Secondary Labeled Function On Many Controls ) VIDEO DECK TRANSPORT CONTROL TRACK VOLUME (FX Parameter When Fader FX Mode Is Engaged)
Controls and Functions CONTROL CHANNEL CUE CONTROL for Key/Filter) UME ONON LOOP LENGTH FADER FX ÷ x LOOP CONTROL SAMPLER VOLUME HOT CUE CONTROL 0% SAMPLER SAMPLER PLAYBACK DECK SELECT REVERSE SMART A/C X Mode Is Engaged) B/D FX CTRL 2 CROSSFADER BEAT LOCK
Connections Microphone MP3 Player Computer Main balanced power amplifier Main unbalanced power amplifier Turntable CD/MP3 Player
Setup There are a number of default MIDI settings you can adjust directly from your hardware. You can set SHIFT button behavior, PUSHTO-KILL encoder behavior, and your MIDI channel. Your DJC.4 sends MIDI data over 4 channels at once, allowing a unique channel message per deck. CHANNEL You can change channel by hold the LEFT DECK “DECK SWITCH” button for 3 seconds and press the Left Deck Hot Cue button 1 to 4.
MIDI MAP 1.
MIDI MAP VIDEO(knob) AUDIO_CROSS_FADER VIDEO_CROSS_FADER SMART_XF XF_LINK CF_CURVE CUE_MIXING CUE_LEVEL 0B,Bn,0F,41(Increment) 0B,Bn,10,00(Minimum) 0B,Bn,11,00(Minimum) 09,9n,24,7F 09,9n,25,7F 0B,Bn,12,00(Minimum) 0B,Bn,13,00(Minimum) 0B,Bn,14,00(Minimum) 0B,Bn,0F,3F(Decrement) 0B,Bn,10,7F(Maximum) 0B,Bn,117F(Maximum) 09,9n,24,00 09,9n,25,00 0B,Bn,12,7F(Maximum) 0B,Bn,13,7F(Maximum) 0B,Bn,14,7F(Maximum) 0x2D 0x2E 0x2F 0x56 0x57 0x30 0x31 0x32 2.
MIDI MAP CENTER DECK LED ON 09,9n,2E,7F 09,9n,2F,7F 09,9n,24,7F 09,9n,25,7F LED OFF 09,9n,2E,00 09,9n,2F,00 09,9n,24,00 09,9n,25,00 MASTER_METER_L1 MASTER_METER_L2 MASTER_METER_L3 MASTER_METER_L4 MASTER_METER_L5 MASTER_METER_L6 MASTER_METER_L7 MASTER_METER_L8 MASTER_METER_L9 MASTER_METER_LA 0B,Bn,03,0C 0B,Bn,03,18 0B,Bn,03,24 0B,Bn,03,30 0B,Bn,03,3C 0B,Bn,03,48 0B,Bn,03,54 0B,Bn,03,60 0B,Bn,03,6C 0B,Bn,03,78 0B,Bn,03,00 0B,Bn,03,00 0B,Bn,03,00 0B,Bn,03,00 0B,Bn,03,00 0B,Bn,03,00 0B,Bn,03,00 0B,Bn,03,00
FAQ/TROUBLESHOOTING 1. My EQ Kill knobs do not work. -You can switch On/Off the EQ PUSH-TO-KILL function by holding the left deck “DECK SWITCH” button for 3 seconds, followed by pressing the “Load B/D” button to switch the mode. The default setting enables EQ PUSH-TO-KILL. 2. I am getting an error message when I plug in my device that says "TBIA-The Data Is Invalid". -This error is related to other audio devices you may have installed on your Windows PC and lower-quality ASIO drivers.
NOTES
NOTES
WARRANTY Thank you for choosing one of Gibson Pro Audio’s brands (Stanton, KRK, or Cerwin Vega!). Your satisfaction is extremely important to us. We proudly stand behind the quality of our work and appreciate that you put your trust in us. Registering your merchandise will help us guarantee that you are kept up to date on our latest advances. To Register Merchandise Purchased from an Authorized Gibson Pro Audio Dealer in the U.S.: Please go to: http://www.gibson.com and register online.
Gibson will warrant all replacement parts and repairs for ninety (90) days from the date of original shipment. In the unlikely event that your merchandise is destroyed, lost or damaged beyond repair while in the possession of Gibson or one of Gibson Pro Audio’s Authorized Service Centers for repair, Gibson will replace that merchandise with one of the same or most similar style of a value not in excess of the original purchase price of your merchandise.
When contacting Gibson, you must include a complete written description of the malfunction of the merchandise. If non-warranty work is required or recommended, a quotation will be issued and must be approved by you before any non-warranty work is commenced. You should consider quotations obtained for non-warranty work immediately and advise the Authorized Gibson Pro Audio Service Center or Gibson of your wishes.
