Instructions / Assembly

ASSEMBLY INSTRUCTIONS

STEP 6

Slide the SEAT(9) onto the RAIL(8). Attach the STOPPER BUMPERS(66) to the RAIL(8) with NUTS(M8x1.25)

(84). Also, please verify that the other STOPPER BUMPER(66) have already been assembled at the factory.

If it has not been pre-assembled, then please assemble at this time.

STEP 7

Attach the REAR STAND(5) to the RAIL(8) with the SUPPORT PLATES(89), WASHERS(M8)(35), LOCK

WASHERS(M8)(34), and BUTTON HEAD BOLTS(M8x1.25x15mm)(57). Tighten all four bolts only after

all four have been started. Press the RAIL CAP(3) into the back end of the RAIL(8).

(Assembled at the factory)