User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Main menu
- 7.3 Menu overview
- 7.4 Functions in DMX mode 1ch
- 7.5 Functions in DMX mode 2Ch (model version with white LEDs)
- 7.6 Functions in DMX mode 2Ch1 (model version with RGB LEDs)
- 7.7 Functions in DMX mode 2Ch2
- 7.8 Functions in DMX mode 3Ch1
- 7.9 Functions in DMX mode 3Ch2 (model version with RGB LEDs)
- 7.10 Functions in DMX mode 3Ch2 (model version with white LEDs)
- 7.11 Functions in DMX mode 3Ch3 (model version with RGB LEDs)
- 7.12 Functions in DMX mode 4Ch (model version with RGB LEDs)
- 7.13 Functions in DMX mode 5Ch (model version with white LEDs)
- 7.14 Functions in DMX mode 6Ch (model version with RGB LEDs)
- 7.15 Functions in DMX mode 7Ch (model version with 648 white LEDs)
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
This setting is only relevant if the device is not controlled via a DMX controller and not working
as slave in a master / slave conguration. In this mode, the LEDs will gradually fade in with a
freely selectable speed from blackout to maximum brightness and reverse, a Strobe eect can
be engaged.
Press [MODE] repeatedly until ‘FA00’ appears in the display and press [ENTER]. Use [UP] and
[DOWN] to select the menu item ‘FAxx’ for the fading speed or the menu item ‘FFxx’ for the
Strobe eect and press [ENTER].
For the fading speed, use [UP] and [DOWN] to select a value between ‘FA01’ (minimum speed)
and ‘FA99’ (maximum speed) and press [ENTER].
For the Strobe eect, use [UP] and [DOWN] to select a value between ‘FF01’ (strobe frequency
approx. 1 Hz) and ‘FF99’ (strobe frequency approx. 30 Hz) or ‘FF00’ (continuous light, no
Strobe eect) and press [ENTER].
Operating mode ‘Fading’ (white
LED model version)
Operating
LED spotlight
32