User manual

Press [M]. Press one of the arrow buttons repeatedly until the display shows ‘STRO’ . Press [OK].

Press one of the arrow buttons repeatedly until the display shows ‘LIGH’ . Press [OK]. You can

now set the brightness. Use the arrow buttons to select a value between 0 (dark, ‘L000’ ) and

100 (full brightness, ‘L100’ ). Press [OK] and then [M]to return to the parent menu.

Press one of the arrow buttons repeatedly until the display shows ‘SPEE’ . Press [OK]. Now you

can adjust the speed of the strobe eect. Use the arrow buttons to select a value between

‘S-01’ (slow) and ‘S-10’ (fast). Press [OK] and then [M]to return to the parent menu.

Press [M]. Press one of the arrow buttons repeatedly until the display shows ‘FADE’ . Press [OK].

Press one of the arrow buttons repeatedly until the display shows ‘MODE’ . Press [OK]. You can

now set the fade mode. Use the arrow keys to select either ‘M-01’ (gradually brightening and

darkening), ‘M-02’ (gradual brightening and abrupt darkening) and ‘M-03’ (abrupt bright‐

ening and gradual darkening). Press [OK] and then [M]to return to the parent menu.

Press one of the arrow buttons repeatedly until the display shows ‘SPEE’ . Press [OK]. Now you

can adjust the speed of the fade eect. Use the arrow buttons to select a value between ‘S-01’

(slow) and ‘S-10’ (fast). Press [OK] and then [M]to return to the parent menu.

Strobe eect

Fade eect

Operating

PAR56 Active300W DMX