User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Operating on the unit
- 7.2 Menu overview
- 7.3 Functions in 3-channel DMX mode
- 7.4 Functions in 5-channel DMX mode
- 7.5 Functions in 8-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
3 Features
The Outdoor Stage Par Quad TR1 is due to its sturdy and weather-proof housing made of die-
cast aluminium especially suitable for outdoor use. With its 12 LEDs, it is particularly suitable
for ambient lighting or open-air stages.
n 12 × 3in1 RGB LED (3 watt each)
n Control via DMX (3 dierent modes), via buttons and display on the unit
n preprogrammed automatic shows and colour macros
n four selectable dimmer curves
n Master / Slave operation
n rugged die-cast aluminium housing
n IP65 (suitable for outdoor use)
n Pressure compensation element (prevents condensation inside the device)
n sturdy double bracket for secure attachment to trusses or rm footing on the ground
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Features
14
Outdoor Stage Par Tri TR1
LED PAR