User manual

Press [M]. Press one of the arrow buttons repeatedly until the display shows ‘DMX’ . Press [OK].

Now you can set the number of the rst DMX channel to be used by the device (DMX address).

Use the arrow buttons to select a value between 1 and 512 (display shows ‘A001’ … ‘A512’ ).

When the display shows the desired value press [OK] to conrm the selection and then [M] to

return to the parent menu. To return to the parent menu without making changes, press [M].

Make sure that this number matches the conguration of your DMX controller. The following

table shows the highest possible DMX address for the various DMX modes.

Mode Highest possible DMX address

4-channel 509

6-channel 507

8-channel 505

DMX address

Operating

LED Vintage Bowl50 RGBA LED Vintage Bowl30 RGBA

LED PAR