User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and operating elements
- 7 Operating
- 8 Technical specifications
- 9 Plug and pin assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.2.3 Operating mode TEXT
In this mode, the device projects text that has been entered and stored via the supplied key‐
board (see
Ä
Chapter 7.5 ‘Operating via keyboard’ on page 46) onto a surface.
1. Press [MENU] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘tXt’ . Conrm the selection with
[ENTER].
3. Use [UP] or [DOWN] to select the desired text mode.
The following text modes are available:
Parameter Meaning
‘tEXt’ Text mode 1, texts ‘t-00’ … ‘t-09’ are being projected in an endless
loop.
‘t-00’ Text mode 2, text ‘t-00’ is being projected.
‘t-09’ Text mode 10, text ‘t-09’ is being projected.
4. Conrm the selection with [ENTER].
Operating
DJ Lase RGB Pro Advanced 3000
35
Showlaser