User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and operating elements
- 7 Operating
- 8 Technical specifications
- 9 Plug and pin assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.2.2 Sound control
In this mode, the device projects programmed patterns sound-controlled onto a surface.
1. Set the sensitivity of the built-in microphone with [Mic Sensitivity] on the front panel of
the device.
2. Press [MENU] to activate the main menu.
3. Press [UP] or [DOWN] repeatedly until the display shows ‘Sou’ . Conrm the selection
with [ENTER].
4. Use [UP] or [DOWN] to select the desired sound mode.
The following sound modes are available:
Parameter Meaning
‘Sou1’ Sound mode 1, show with programmed patterns, geometric shapes in
random order.
‘Sou2’ Sound mode 2, show with programmed patterns, geometric shapes in
random order.
‘Sou3’ Sound mode 3, show with programmed ‘New Year’ motto patterns
‘Sou4’ Sound mode 4, show with programmed ‘Christmas’ motto patterns
‘Sou5’ Sound mode 5, show with programmed ‘Love’ motto patterns
‘Sou6’ Sound mode 6, show with programmed ‘Birthday’ motto patterns
Operating
DJ Lase RGB Pro Advanced 3000
33
Showlaser