User manual

Press [M]. Press one of the arrow buttons repeatedly until the display shows ‘TEST’ . Press [OK].

Press one of the arrow buttons repeatedly until the display shows ‘CH1’ to ‘CH6’ or ‘STRO’ .

Press [OK]. Now you can set the brightness of the six basic colours, each in a range from 0 to

255, or select the strobe rate in a range of 0 to 24.

This mode is also suitable for generating constant or ashing light of a colour mixed from the

four LED colours without DMX control.

When the display shows the desired value press [OK] to conrm the selection and then [M] to

return to the parent menu. To return to the parent menu without making changes, press [M].

Press [M]. Press one of the arrow buttons repeatedly until the display shows ‘FADE’ . Press [OK].

Now you can set the fade programmes of the preprogrammed automatic shows. Use the

arrow buttons to select a value between 1 and 7 (display shows ‘F-01’ … ‘F-07’ ).

This setting is only relevant if the device is not controlled via DMX. When the display shows the

desired value, press [OK] to conrm the selection and return to the main menu. To return to

the main menu without making changes, press [M].

Manual test

Fade programmes

Operating

LED PAR