Use and Care Manual

ManualsBrandsSquare D ManualsPlumbing Product30-50 PSI Pumptrol Pressure Switch

Commercial Pressure and Float Switches for Power Circuits

Electromechanical Pressure Switches, Class 9013 Types F and G

03/2011

Type G, 2-Pole, 2 N.C. Contacts

Degree of Protection IP20, NEMA Type 1, 3R, 7, and 9

Flange Style

Adjustable range of setting point

Contacts open on rising pressure

Fluid Connections 1/4" NPSF internal 1/4" NPSF internal 1/8" NPSF internal 1/4" NPSF internal 3/8" NPSF internal 1/8" NPSF internal

Catalog Numbers

NEMA Type 1, IP20 9013GMG2 — 9013GSG1 9013GSG2 9013GSG3 —

NEMA Type 3R

[1]

Must be mounted in vertical position to maintain enclosure rating.

— 9013GSB2 — — — —

NEMA Type 7, 9 —————9013GSR1

Fluids / Pressure

Controls

Water or air Water or air Water or air Water or air Water or air Water or air

Pressure Range

Cut-out psig (bar) 10–35 (0.7–2.4) 20–80 (1.4–5.5) 20–80 (1.4–5.5) 20–80 (1.4–5.5) 20–80 (1.4–5.5) 20–80 (1.4–5.5)

Cut-in psig (bar) 5.5–30.5 (0.4–2.1) 5–60 (0.4–4.2) 5–60 (0.4–4.2) 5–60 (0.4–4.2) 5–60 (0.4–4.2) 5–60 (0.4–4.2)

Weight, lb (kg) 2 (0.91) 2 (0.91) 2 (0.91) 2 (0.91) 2 (0.91) 8 (3.62)

Supplemental Specifications (not shown under General Specifications)

Differential psig (bar) 4–8 (0.3–0.6) 15–30 (1.0–2.1) 15–30 (1.0–2.1) 15–30 (1.0–2.1) 15–30 (1.0–2.1) 20–40 (1.4–2.8)

Maximum Allowable

Pressure psig (bar)

35 (2.4) 80 (5.5) 80 (5.5) 80 (5.5) 80 (5.5) 80 (5.5)

Cable Entry

3 knockouts for

1/2 in. conduit

3 knockouts for

1/2 in. conduit

3 knockouts for

1/2 in. conduit

3 knockouts for

1/2 in. conduit

3 knockouts for

1/2 in. conduit

2 conduit entries

3/4"-14 NTP

Pressure Switch Style Diaphragm

Ordering information Pressure codes

1. Select the catalog number from the table above.

2. Select the pressure code and add the code

designation to the end of the catalog number.

Ensure that the pressure code falls within the

limits of the device as shown in the device listings.

3. If special features are desired, add the

appropriate Form letter to the catalog number

after the pressure code. Arrange the Form letters

in alphabetical sequence when ordering more

than one special feature.

4. Add the packaging code at the end of the

sequence, after the Forms. (For example, to order

a standard pack of 10 devices, specify

9013GHG2J99RZC10.) If no packaging code is

indicated, the devices will be shipped individually

packaged.

To order a standard pack of 10 devices per box

C10 (available on GHB, GHG, GSB, and GSG)

see page 39 for Form C10.

NOTE: Existence of a code does not imply that the code is available for any

or all devices.

Settings (psi) Code Settings (psi) Code

20–40 J20 110–150 J56

30–50 J21 120–150 J57

40–20 J23 125–150 J58

40–60 J24 125–175 J60

60–80 J25 130–175 J61

70–90 J26 140–170 J66

70–100 J28 140–175 J62

75–100 J29 145–175 J63

80–100 J30 150–120 J64

90–120 J31 150–175 J67

100–80 J51 215–250 J65

100–125 J53 Specify pressure settings J99

110–125 J54 — —