Use and Care Manual
4
UNPACKING YOUR UPRIGHT FREEZER
WARNING: Use two or more people to move upright freezer.
Failure to do so can result in back or other injury.
• Remove tape and any labels from your upright freezer before
using (except the rating label).
• Any tape or glue residue can be removed by rubbing the area
briskly with your thumb. Or rub the area with a small amount of
liquid dish sop, wipe with warm water and dry.
• Do not use sharp instruments, rubbing alcohol, flammable fluids,
or abrasive cleaners to remove tape or glue. These products can
damage the surface of your upright freezer.
• When moving the upright freezer, do not tilt the upright freezer
beyond 45° from upright position.
• Before initial use, please use
scissor to cut and remove the
plastic cable ties at the center
of each shelf, as shown in
picture. There is a total of
three cable ties.
CLEANING BEFORE USE:
After you remove all of the packaging materials (be sure the foam
between outside condenser and cabinet is removed), clean the
inside of your upright freezer before using it.