Brochure

Bulletin 30-10 / Page 15
22, 134a, 401A, 402A, 404A, 407C, 502, 507 Types E35 Series
Application
Types E35 Series solenoid valves are pilot operated
for refrigeration and air conditioning applications. They
are suitable for suction service because very low pres-
sure differential, 1 psi, is required for full operation.
The E35 Series may be mounted horizontally,
on their side or in a vertical line.
The Type E35 series solenoid valves feature extend-
ed solder type connections as standard. One important
benefit to the user is that all valves in the “E35” se-
ries can be installed without disassembly using either
low or no silver content brazing alloy.
The MKC-1 and OMKC-1 coils are Class “F” tempera-
ture rated and are provided as standard, therefore a high
temperature coil is not required for discharge service.
Ordering Instructions
When ordering complete valves, specify Valve Type,
Connections, Voltage and Cycles.
When ordering Body Assembly, specify Valve Type
and Connections.
W 1-5/8” ODM Type L tubing may be slipped over
1-3/8” fitting, without the use of a coupling.
When ordering Coil Assembly ONLY, specify Coil
Type, Voltage and Cycles.
Example: MKC-1 120/50-60; OMKC-1 120/50-60.
Dimensions – Inches
EVLAV
SEIRES
EPYT
SNOITCENNOC
sehcnI
ninwohsseziS
EULB eblliw
sselnudehsinruf
.deificepsesiwrehto
TROP
EZIS
sehcnI
DPOM
isp
SEITICAPACDIUQILLANIMON
noitaregirfeRfosnoT
SGNITARLIOC
STNAREGIRFER
22 a431 A104 A204 A404 C704 205 705
porDerusserP – isp
CA CD 3 2 2 3 3 3 3 3
DRADNATS
SELCYC/STLOV
STTAW
CA CD
53E
091S53E
FDO8/1-1XFDO8/1-1
1
003 052
9.07 0.35 9.65 6.64 5.64 8.46 0.64 6.54
06-05/42
06-05/021
06-05/042-802
06-05/042-802-021
01 51
091S53EM
091S53EO 003
0111S53E
W FDO8/3-1XFDO8/3-1
003 052
0111S53EM
0111S53EO 003
Specifications — MKC-1 and OMKC-1 Coil
Type ME35S1110
Normally Closed
*Add 1.12” for E35 Series Valves with Manual Lift Stem.
EPYT A B
C D
E*
FDO FDO
53E
091S53E 8/1-1 60.01 18.4
18.4 49.5
19.0 48.
0111S53E 8/3-1 60.11 49.5 79.0 48.
VALVE
SERIES
NORMALLY
CLOSED
NORMALLY
OPEN
FITTING
SIZE
FITTING
DEPTH
OE35
SERIES
1.64
Optional 1/2” Conduit Boss
n
Available with conduit boss or junction box at no extra charge.
n
For capacity at other pressure drops, see Pages 4 and 5.
Listed
Approved
OMKC-1 Coil
INLET OUTLET
C± .040
E± .020
B± .060
B± .060
A± .100
D
MKC-1 Coil
INLET OUTLET
C± .040
D± .040
E± .020
B± .060B± .060
A± .100
1.56 Required
for Coil Removal
D
ME35
SERIES
n
Maximum rated pressure: Type E35 Series, 500 psi
n
Dual voltage 4-wire coils, 120-208-240/50-60 are available at slight additional cost. For
other voltages and cycles, consult Sporlan, Washington, MO 63090.