Brochure

BULLETIN 10-10 — Page 23
For Refrigerants 22, 134a, 404A, 507
ODF Solder Connections
t TYPE EG
1/4” ODF External
Equalizer
Connection
.25
1.33
Top View
Sporlan Type EG valve is a forged brass body,
externally adjustable valve with ODF solder
connections. The thermostatic element is replace-
able, and the inlet connection has a removable
100 mesh strainer which can be cleaned and/or
replaced without removing the valve from the
line. This valve is designed for small refrigera-
tion systems such as refrigerated cases, coolers
and freezers. In addition to refrigeration applica-
tions, the externally equalized Type EG valve
may be used for small capacity air conditioning
and heat pump units.
Outlet Connections
1/2” ODF
Mating Distributors (See Bulletin 20-10)
D260, D262
For complete details of construction, see page 35.
SPECIFICATIONS ELEMENT SIZE NO. 53, KNIFE EDGE JOINT
Q Valves listed in this column NOT AVAILABLE with MOP Type air conditioning charges.
W ODF Solder indicates a female connection on the valve of proper diameter to receive copper tubing of
corresponding OD size. Thus 1/2” ODF will receive 1/2” OD tubing.
REFRIGERANT
(Sporlan Code)
VALVE TYPE
NOMINAL
CAPACITY
Tons of
Refrigeration
THERMOSTATIC
CHARGES
AVAILABLE
STANDARD
TUBING
LENGTH
CONNECTIONS - Inches
W
ODF Solder
Blue figures are standard
and will be furnished unless
otherwise specified.
NET
WEIGHT
SHIPPING
WEIGHT
Internal
Equalizer
Q
External
Equalizer
1/4” ODF
Solder
INLET OUTLET
22 (V)
407C (N)
407A (V)
422D (V)
EGV-1/5 EGVE-1/5 1/5
Refer to Recommended
Thermostatic Charges on page 3
5 ft.
1.5 m
3/8 1/2
2 lbs.
0.90 kg
3 lbs.
1.36 kg
EGV-1/3 EGVE-1/3 1/3
EGV-1/2 EGVE-1/2 1/2
EGV-3/4 EGVE-3/4 3/4
EGV-1 EGVE-1 1
EGV-1-1/2 EGVE-1-1/2 1-1/2
– EGVE-2 2
EGV-2-1/2 – 2-1/2
– EGVE-3 3
134a (J)
12 (F)
401A (X)
409A (F)
EGJ-1/8 EGJE-1/8 1/8
EGJ-1/6 EGJE-1/6 1/6
EGJ-1/4 EGJE-1/4 1/4
EGJ-1/2 EGJE-1/2 1/2
EGJ-1 EGJE-1 1
EGJ-1-1/2 EGJE-1-1/2 1-1/2
– EGJE-2 2
404A (S)
502 (R)
408A (R)
EGS-1/8 EGSE-1/8 1/8
EGS-1/6 EGSE-1/6 1/6
EGS-1/4 EGSE-1/4 1/4
EGS-1/2 EGSE-1/2 1/2
EGS-1 EGSE-1 1
EGS-1-1/2 EGSE-1-1/2 1-1/2
– EGSE-2 2
507 (P)
402A (L)
EGP-1/8 EGPE-1/8 1/8
EGP-1/6 EGPE-1/6 1/6
EGP-1/4 EGPE-1/4 1/4
EGP-1/2 EGPE-1/2 1/2
EGP-1 EGPE-1 1
EGP-1-1/2 EGPE-1-1/2 1-1/2
– EGPE-2 2
Type
EG
STANDARD
CHARGES
REFRIGERANT
22 134a 404A 507
C
0.50 OD x 3.50
Z & ZP Series
0.50 OD x 3.50 – 0.50 OD x 3.50
X
0.75 OD x 4.00 – 0.75 OD x 4.00
CP Series
0.50 OD x 3.50 –
VGA
0.75 OD x 2.00 – – –
Diameter
of Type X
Charge
Diaphragm
Case is 3.62
1.80
1.31
2.30
2.31
1.68
3.06
*Removable
Strainer
P/N 3427-000
DIMENSIONS
BULB SIZES - Inches
* Type EG valves manufactured prior to June 1994 use a smaller inlet strainer, P/N 1935-000, which has a 1/2” brass hex head. Current Type EG valves use inlet strainer P/N 3427-000 which has a 5/8” brass hex head.
These strainers are not interchangeable. The 3427-000 is available as a replacement part. The 1935-000 is no longer available.