Brochure
For Refrigerants 22, 134a, 404A, 507
ODF Solder - Flange Connections
t TYPE H
BULLETIN 10-10 — Page 31
Sporlan Type H valve is a brass bar body,
externally adjustable valve available with either
ODF solder or FPT flange connections. The
thermostatic element is replaceable, and the inlet
connection has a permanent 16 mesh strainer.
The FPT flange connection requires the Sporlan
K-1178 adapter kit. This valve type provides the
smallest capacity TEVs with flange connections,
and it is designed for both air conditioning and
refrigeration applications.
Outlet Connections
7/8” ODF, 1-1/8” ODF, “H” flange type
Mating Distributors (See Bulletin 20-10)
1109, 1110, 1112, 1113, 1115, 1116, 1124,
1192 (aluminum), 1653(R), 1655(R)
For complete details of construction, see page 35.
SOLDERING
BUSHING
A B
1/2
2.00 0.88
5/8
2.00 0.88
7/8
2.00 0.88
1-1/8
2.06 0.94
SPECIFICATIONS ELEMENT SIZE NO. 33, KNIFE EDGE JOINT
Q Valves listed in this column NOT AVAILABLE with MOP Type air conditioning charges.
W Standard External Equalizer Connection 1/4” SAE Flare, 1/4” ODF Solder connection available on request.
E ODF Solder indicates a female connection on the valve of proper diameter to receive copper tubing of corresponding OD size. Thus, 5/8” ODF will receive 5/8” OD tubing.
R Kit K-1178 with two brass bushings is available for two purposes: 1) To allow the current Type H valve to replace obsolete Types T and H with 1.125” x 0.75” flange rings by mating with the smaller flange ring
bushings and/or distributors. 2) To allow the Type H to use 1/2” FPT connections — Part number 225-002 and 1/2” socket weld connections — Part number 580-000. Order the appropriate 1/2” connections and one
K-1178 per valve.
REFRIGERANT
(Sporlan Code)
VALVE TYPE
NOMINAL
CAPACITY
Tons of
Refrigeration
THERMOSTATIC
CHARGES
AVAILABLE
STANDARD
TUBING
LENGTH
CONNECTIONS - Inches
E
ODF Solder
Blue figures are standard
and will be furnished unless
otherwise specified.
FLANGE
RING
SIZE
OD x ID
Inches
R
NET
WEIGHT
SHIPPING
WEIGHT
Internal
Equalizer
Q
External
Equalizer
W
INLET OUTLET
22 (V)
407C (N)
407A (V)
422D (V)
HV-5-1/2 HVE-5-1/2 5-1/2
Refer to Recommended
Thermostatic Charges on page 3
5 ft.
1.5 m
5/8 or 7/8 7/8 or 1-1/8
1.25 x 1.00
5 lbs.
2.27 kg
6 lbs.
2.72 kg
– HVE-7 7
– HVE-11 11
– HVE-16 16
7/8
7/8 or 1-1/8
– HVE-20 20
134a (J)
12 (F)
401A (X)
409A (F)
HJ-3 HJE-3 3
5/8 or 7/8 7/8 or 1-1/8
HJ-4 HJE-4 4
HJ-5 HJE-5 5
– HJE-8 8
– HJE-12 12
7/8
7/8 or 1-1/8
404A (S)
502 (R)
408A (R)
HS-3 HSE-3 3
5/8 or 7/8 7/8 or 1-1/8
HS-4 HSE-4 4
– HSE-6-1/2 6-1/2
– HSE-9 9
– HSE-12 12
7/8
7/8 or 1-1/8
507 (P)
402A (L)
HP-3 HPE-3 3
5/8 or 7/8 7/8 or 1-1/8
HP-4 HPE-4 4
– HPE-6-1/2 6-1/2
– HPE-9 9
– HPE-12 12
7/8
7/8 or 1-1/8
STANDARD
CHARGES
REFRIGERANT
22 134a 404A 507
C
0.75 OD x 4.00 0.50 OD x 5.00 0.75 OD x 4.00
Z & ZP Series
0.75 OD x 4.00 – 0.75 OD x 4.00
X
0.75 OD x 4.00 – 0.75 OD x 4.00
CP Series
0.75 OD x 4.00 –
VGA
0.75 OD x 4.00 – – –
BULB SIZES - Inches
Diameter
of Type X
Charge
Diaphragm
Case is 3.62
4.50
2.06
A
A
B B
2.75
DIMENSIONS
CONNECTIONS - Inches
Type
H