User's Manual

rl Gaming RECLINER
A. Backrest
B. Seat base
C. Feet (×4)
Upright Reclined
Parts and Supplies
Adjusting the Reclining
Position
Assembly Instructions
1. Screw the four feet onto the seat base, and tighten until snug [ Fig. 1 ].
2. Place the seat base on a flat surface and lift the back flap of the backrest to expose the
attachment rails.
3. Align the rails with the brackets on the seat base. Press the rails down into the brackets
until the locking tabs snap closed [ Fig. 2 ].
4. Tuck the touch-connect strip that extends from the bottom front of the backrest through
the space between the backrest and seat base. Attach it to the touch-connect strip on
the seat base.
5. Attach the touch-connect strip at the bottom back of the backrest to the strip at the
bottom of the seat base [ Fig. 3 ].
Disassembly Instructions
1. Detach the touch-connect straps from the front and back of the chair and lift the back
flap.
2. Pull the two locking tabs toward the center of the chair to unlock the backrest. While
pulling the tabs to the center of the chair, lift the backrest up and out of the brackets.
Precautions
• Make sure this product is intact and that there are no
missing parts.
• Clean the chair with only a soft, dry cloth.
• Make sure everything is secure before use.
• Use the chair on a flat surface only.
• Do not stand on the chair.
• Do not put your weight only on the backrest while the chair
is in a reclined position.
• Do not let anyone press down on the backrest while the
chair is in a reclined position.
• Recline slowly.
• Do not seat more than one person at a time in this chair.
• Do not sit on the arms or backrest of the chair.
• All images are for illustrative purposes only.
A
B
C
Fig. 1
Fig. 3
Fig. 2