Operation Manual

5. Connecting the headset to a DVD player:

1. Plug the mains adapter into the “DC socket” on the back of the ampliﬁer box

and insert the mains plug into a power socket.

2. Connect cable B as shown in ﬁg. 2 to the original output cable of your DVD

player. Make sure the colour markings on the input and output agree in each

case.

3. Connect cable B to the “5.1 Ch Audio Input” socket on the back of the ampliﬁer

box.

4. Connect cable A to the “5.1 Ch Audio Output” socket on the back of the

ampliﬁer box.

5. Connect the other end of cable A to the 3.5 mm RCA connector of cable C.

6. Connect cable C to your hi-ﬁ or other system.

7. Connect the headset to one of the two sockets on the front of the ampliﬁer

box.

6. If you do not want to connect an audio system to the ampliﬁer:

1. Connect cable C to your DVD player and connect the other end to cable A.

2. Connect cable A to your ampliﬁer box.

Fig. 3

Fig. 2