Use and Care Manual

ManualsBrandsSPEEDHIDE ManualsPaint1 gal. PPG1085-4 Best Beige Satin Interior Paint

Architectural Coatings PPG Speedhide Interior Wall & Ceiling Latex Ultra Flat

GENERAL DESCRIPTION PRODUCT DATA

RECOMMENDED SUBSTRATES

FEATURES / BENEFITS

PPG Speedhide paint is designed as a high-hiding, easy-to-apply inte-

rior ultra flat wall paint that delivers exceptional touch-up to get the job

done on time and within budget. This low VOC, low-odor paint

enables interior walls, ceilings, and trim to be painted while occupied,

delivering the durable product performance required. Speedhide

Interior Ultra Flat paint is recommended for all commercial, mainte-

nance, and residential applications where an ultra flat uniform finish is

desirable.

Concrete/Masonry Gypsum Wallboard-Drywall

Concrete Block (CMU) Plaster

Ferrous Metal Wood

PRODUCT TYPE: Vinyl Acrylic Latex

SHEEN: Flat, 1-3 @85º

VOLUME SOLIDS*: 34% +/- 2%

WEIGHT SOLIDS*: 54% +/- 2%

WEIGHT/GALLON*: 11.9 lbs. (5.4 kg) +/- 0.2 lbs. (91 g)

VOC: <50 g/L (0.4 lbs./gal.)

*Product data calculated on product 6-0011.

COVERAGE: Approximately 300 to 400 sq. ft. (28 to 37 sq. meters) per

U.S. Gallon (3.78L) on smooth, nonporous surfaces.

Wet Film Thickness: 4.0 to 5.3 mils

Wet Microns: 102 to 135

Dry Film Thickness: 1.4 to 1.8 mils

Dry Microns: 36 to 46

Coverage figures do not include loss due to surface irregularities and

porosity or material loss due to application method or mixing. Some col-

ors, drastic color changes, or porous substrates may require more than

one coat to achieve a uniform finish.

DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity.

To Touch: 30-60 minutes

To Recoat: 2-4 hours

To Full Cure: 30 days

Drying times listed may vary depending on temperature, humidity, film

build, color, and air movement. Wait at least 30 days after painting

before cleaning the surface with a non-abrasive, mild cleanser. Very

deep colors may require longer to fully cure.

CLEANUP: Clean tools with warm, soapy water.

DISPOSAL: Contact your local environmental regulatory agency for

guidance on disposal of unused product. Do not pour down a drain or

storm sewer.

FLASH POINT: Over 200ºF (93ºC)

PRODUCT INFORMATION

6-0010 White

6-0011 White & Pastel Base

6-0030 Midtone Base*

6-0040 Ultra Deep Base*

6-0100 High-Hide White

6-0102 Antique White

6-0122 Brilliant White

6-0999 Black

6-1011 Promaster White Tint

*Must be tinted before use.

Refer to the appropriate color formula book, automatic tinting equip-

ment, and or computer color matching system for color formulas and

tinting instructions.

6-0011

SPEEDHIDE

6-0011 Series

Read Label and Safety Data Sheet prior to use. See other cautions on last page.

Features Benefits

Less than 50 g/L VOC Meets the most stringent VOC regulations nationwide

Exceptional Airless Spray Touch-Up Reduces labor costs

Good Hiding Power Hides surface imperfections

Good Burnish Resistance Resists sheen change when cleaned

PACKAGING

CONFORMANCE STANDARDS

VOC compliant in all regulated areas

1-Gallon (3.78 L)

5-Gallon (18.9 L)

Not all products are available in all sizes.

Summary of content (3 pages)

PAGE 1
SPEEDHIDE® Architectural Coatings PPG Speedhide Interior Wall & Ceiling Latex Ultra Flat GENERAL DESCRIPTION PPG Speedhide paint is designed as a high-hiding, easy-to-apply interior ultra flat wall paint that delivers exceptional touch-up to get the job done on time and within budget. This low VOC, low-odor paint enables interior walls, ceilings, and trim to be painted while occupied, delivering the durable product performance required.
PAGE 2
6-0011 Series Speedhide Architectural Coatings PPG Speedhide Interior Wall & Ceiling Latex Ultra Flat GENERAL SURFACE PREPARATION Surface must be clean and dry. Remove all loose, peeling paint, dirt, grease, and any other surface contaminants. Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough, and patched surfaces. Plaster, concrete, and masonry surfaces must be completely dry, free of efflorescence, and allowed to cure for 30 days prior to painting.
PAGE 3
6-0011 Series Speechide Architectural Coatings PPG Speedhide Interior Wall & Ceiling Latex Ultra Flat APPLICATION INFORMATION Stir thoroughly before using and occasionally when in use. When using more than one can of the same color, intermix to ensure color uniformity. USE WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN. Read all label and Safety Data Sheet (SDS) information prior to use. SDS are available through our web site or by calling 1-800-441-9695.