SDS

6-650XI PPG SPEEDHIDE 100% ACRYLIC LATEX EXTERIOR FLAT WHITE &
PASTEL BASE
Product name
13
Product code
Date of issue
Version
00408262
13 July 2020
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid.
Not available.
1.26
Not available.
3.3 kPa (25 mm Hg) [room temperature]
Soluble in the following materials: cold water.
Alcohol-like.
Odor
pH
Various
Color
Evaporation rate
0.05 (butyl acetate = 1)
Auto-ignition temperature
Flash point
Not available.
Closed cup: Not applicable. [Product does not sustain combustion.]
Not available.
9
Viscosity
Kinematic (40°C (104°F)): >0.21 cm
2
/s (>21 cSt)
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
100°C (212°F)
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Not available.
Decomposition temperature
:
Not available.
% Solid. (w/w)
:
47.696
Density ( lbs / gal )
:
10.52
Volatility
:
66% (v/v), 52.304% (w/w)
Section 10. Stability and reactivity
Conditions to avoid
The product is stable.
Chemical stability
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
When exposed to high temperatures may produce hazardous decomposition products.
Keep away from the following materials to prevent strong exothermic reactions:
oxidizing agents, strong alkalis, strong acids.
Refer to protective measures listed in sections 7 and 8.
United States
Page: 8/14