SDS

6-650XI PPG SPEEDHIDE 100% ACRYLIC LATEX EXTERIOR FLAT WHITE &
PASTEL BASE
Product name
13
Product code
Date of issue
Version
00408262
13 July 2020
Section 2. Hazards identification
Signal word
:
Danger
Hazard statements
:
May cause cancer.
Causes damage to organs through prolonged or repeated exposure.
Hazard pictograms
:
Precautionary statements
Prevention
:
Obtain special instructions before use. Wear protective gloves. Wear protective
clothing. Wear eye or face protection. Do not breathe vapor. Do not eat, drink or
smoke when using this product.
Response
:
IF exposed or concerned: Get medical advice or attention.
Storage
:
Store locked up.
Disposal
:
Dispose of contents and container in accordance with all local, regional, national and
international regulations.
Supplemental label
elements
:
Contains isothiazolinones. May cause allergic reaction. Sanding and grinding dusts
may be harmful if inhaled. This product contains crystalline silica which can cause lung
cancer or silicosis. The risk of cancer depends on the duration and level of exposure to
dust from sanding surfaces or mist from spray applications. Emits toxic fumes when
heated. DANGER - RAGS, STEEL WOOL OR WASTE SOAKED WITH THIS
PRODUCT MAY SPONTANEOUSLY CATCH FIRE IF IMPROPERLY DISCARDED.
IMMEDIATELY AFTER EACH USE, PLACE RAGS, STEEL WOOL OR WASTE IN A
SEALED WATER-FILLED METAL CONTAINER.
Hazards not otherwise
classified
:
None known.
Section 3. Composition/information on ingredients
titanium dioxide
≥10 - ≤20
13463-67-7
crystalline silica, respirable powder (<10 microns)
≥5.0 - ≤10
14808-60-7
Diatomaceous earth
≥1.0 - ≤5.0
61790-53-2
crystalline silica, respirable powder (>10 microns)
≥1.0 - ≤5.0
14808-60-7
Kaolin
≥1.0 - ≤5.0
1332-58-7
zinc oxide
≥1.0 - ≤5.0
1314-13-2
proprietary ingredient
≥1.0 - ≤5.0
Not available.
Ingredient name
CAS number
%
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Substance/mixture
:
Mixture
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Product name
6-650XI PPG SPEEDHIDE 100% ACRYLIC LATEX EXTERIOR FLAT WHITE &
PASTEL BASE
:
SUB codes represent substances without registered CAS Numbers.
United States
Page: 2/14