User Manual

LAYERPAGESWaveforms

EachofOmnisphere’sLFOscanhaveitsownwaveshape.TherearenineavailableLFOwaveforms.

Sine–Asmoothcshapethatbegins
positiveandthencurvesnegativeand
backagain.Usefulforsweepsandvibrato.
 
Triangle–Isapositive/negativeshape
liketheSine,butwithoutcurvature.Useful
forsweepsandvibrato.
 
Square–Startsatmaximumpositive
valueandthendropstomaximum
negativevalue.Usefulfortrillsandpulsing
effects.
 
RoundedSquare–AsmoothedSquare
wave.Idealforsmoothpulsing.
 
Ramp–Alinearslopefromhighestto
lowesttohighestvalue.Thiswaveformis
alsofrequentlyreferredtoasasawtooth
wave.Usefulforsweeps.
 
ReverseRamp–Alinearslopefrom
lowesttohighestvalue.Thiswaveformis
alsofrequentlyreferredtoasaninverted
sawtoothwave.Usefulforreversesweeps
 
SampleandHold–Stepsthrough
randomvalues.Usefulforanalogsynth
effects.
 
Heartbeat–Modeledafterahuman
heartbeat
 
Noise/RandomSimilartoSampleand
Hold,withrandomvalues,butdoesn'tstep,
thevalueschangeimmediately.Usefulfor
addingchaos.

Thewaveformscanbechangedbyselectingthestepperbuttonsorbyclickingonthewaveformitself,
whichwilldisplaythewaveformselectionmenu.
