Installation Guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

P.O. Box 43167

Atlanta, GA 30336

800-299-5305

.019 X 24” X 50’ – Aluminum Trim Coil

Bright White Polyester Trim Coil

Spectra Metal Sales, Inc. is a member of the National Coil Coating Association and uses

the NCCA’s standards as guidelines for physical testing.

 The Aluminum used is alloy 3105-H28 or 3105-H25 which meets the specifications set forth in the

“Aluminum Standards and Data 2006” published by the Aluminum Association. The finished gauge of

the Aluminum for this coil is .019, +/- .002.

 The surface of the Aluminum sheet is thoroughly cleaned and dried to remove impurities and coated

with Bonderite 1402-W non-cyanide chromate conversion coating.

 The Aluminum’s inside and outside coating is a thermo polyester paint which is roll coated and baked

per manufactures specifications.

 The DFT range of the applied topcoat finish is .60 mils, +/- .2 mils.

Spectra Metal Sales, Inc. has a complete line of state of the art quality control

equipment which includes:

Hunter DP-9000 Colormeter

Garner Impact Tester

Garner Cross Hatch Tester

Fischer Dual Scope Film Thickness Gauge

Gardner Gloss Meter

 The paint specifications used for our smooth white polyester coated trim coil are as follows:

Gloss (60°): 10 +/- 2 Units (varies by color)

Solvent Resistance: 100 Double rubs (M.E.K.)

Flexibility: .019 (+/-.002) 2 T Bend minimum

Impact (N.T.O.): 1-1/2

Times metal thickness in Inch-Lbs (ASTM D 2794)

Pencil Hardness: F - 2H

Humidity Resistance: No blistering, loss of adhesion after 1,000 hours exposure to 100%

relative humidity. (ASTM D 2247)

Salt Spray Resistance: No field blistering and no more than 1/16” creep from a score line

after neutral salt spray testing for 1,000 Hours (ASTM B 117)

Weathering Resistance: Will withstand ten years outdoor southern exposure in South

Florida, without cracking, blistering, splitting or pealing.

PAGE 1
.. .. .. .. . P.O. Box 43167 Atlanta, GA 30336 800-299-5305 .019 X 24” X 50’ – Aluminum Trim Coil Bright White Polyester Trim Coil Spectra Metal Sales, Inc. is a member of the National Coil Coating Association and uses the NCCA’s standards as guidelines for physical testing.  The Aluminum used is alloy 3105-H28 or 3105-H25 which meets the specifications set forth in the “Aluminum Standards and Data 2006” published by the Aluminum Association. The finished gauge of the Aluminum for this coil is .