Manual

53
Figure 5-36
11. Click “Yes” and a dialog box will pop up showing that the import was successful. Click “Ok” to complete
downloading the certificate.
Figure 5-37
 To use the “Install Signed Certificate” option, follow the directions below.
1. In the HTTPs interface, select the certificate path and the certificate key path and click Upload.
2. Install the root certificate - refer to steps 6~11 for details.
3. Check “Enable HTTPs” and click “Save”. The device will reboot.
4. Use HTTPs to log in by entering the IP address in the browser, starting with https://. The browser will show a
certificate error if the certificate is not installed, which is shown in Figure 5-38.