Manual

1 Connection and Login

1.1 Network Connection

Connect the camera to a network and run the IP Scanner tool. IP Scanner can search for the device on the local

network.

The camera is set to DHCP mode by default.

Open up IP Scanner.

In the device list, you can view the IP address, model number, and MAC ad

of each device. Select the applicable device and double click to open up the web viewer.

See Figure 1- 1.

1.2 Log in

Open Internet Explorer

and input network camera address in the address bar or double click the

device in IP Scanner.

If it’s the first time accessing the camera, the browser may request to install the Active

to v

iew live video in the browser. Go ahead and follow the steps to install the plug

The login interface is shown as below. See

Please input your user name and password.

Default user name is admin

and password is

Note: For security

purposes, please change the password after initial login.

Connect the camera to a network and run the IP Scanner tool. IP Scanner can search for the device on the local

The camera is set to DHCP mode by default.

In the device list, you can view the IP address, model number, and MAC ad

of each device. Select the applicable device and double click to open up the web viewer.

Figure 1- 1

and input network camera address in the address bar or double click the

If it’s the first time accessing the camera, the browser may request to install the Active

X plug

iew live video in the browser. Go ahead and follow the steps to install the plug

-in.

The login interface is shown as below. See

Figure 1-2.

Please input your user name and password.

and password is

1234.

purposes, please change the password after initial login.

Connect the camera to a network and run the IP Scanner tool. IP Scanner can search for the device on the local

In the device list, you can view the IP address, model number, and MAC ad

dress

of each device. Select the applicable device and double click to open up the web viewer.

and input network camera address in the address bar or double click the

X plug

-in. This is required