Manualshelf

Installation Guide

ManualsBrandsSpeakman ManualsShut-off ValvesS-3231
12
SPEAKMAN COMPANY
S-3231 Installation, Maintenance & Operation Instructions
COMMANDER® HEALTHCARE
BEDPAN WASHER
DESCRIPTION
Speakman chrome plated brass bedpan washer combination. Wall mounted double pedal self-closing mixing valve.
Renewable operating units. ½” NPTF inlet. ½” NPTF outlet. Elevated vacuum breaker. Supply ell with ½” NPTF inlet and
wall flange. 69” white vinyl reinforced hose. Insulated handle, spray outlet and wall hook.
◊ IVB –
Inline Vacuum Breaker
◊ SCV –
Self Closing Valve on
Handle with Elevated Vacuum
Breaker
◊ USS-
Union Separate
Stops
◊ UAS-
Union Angle Stops
OPTIONS
SPECIFICATIONS
VALVE SUPPLIES: ½” NPT FEMALE.
SHIPPING WEIGHT: XXX LBS.
INSTALLATION
NOTE: Reference the rough-in for supply pipe installation. Use pipe sealant on all pipe threads. Finished wall must be
supported where mixing valve mounts.
Install the rough (behind the wall) piping and valve mounting support. Complete the finished wall construction. For
ease of installation, it is recommended that union connections (not supplied) be installed on the inlet supply piping.
With unions installed, connect mixing valve to the supply lines. Hand tighten coupling nuts of unions. Mark the finished
wall for the mixing valve mounting screws. Remove mixing valve from the supply lines. Drill necessary holes for
mounting screws. Reconnect valve to supply lines and wrench tighten. Attach valve to wall using mounting screws (not
provided). Connect outlet piping to the mixing valve. With the necessary openings in the finished wall, assemble the
supply ell, vacuum breaker and spray hose assembly to the rough piping. (See separate IMO and roughing-in sheets
for detailed installation instructions on the supply ell, vacuum breaker, and spray hose assembly.) Once the installation
has been completed, turn water supplies on and check all connections for leaks.
OPERATION
Holding the spray hose assembly, simply press the foot pedal(s) to operate the bedpan washer.
MAINTENANCE
(CARE and CLEANING)
Periodically remove spray face and clean out any clogged holes. The gleaming finish or your SPEAKMAN
COMMANDER HEALTHCARE bedpan washer can be cleaned by using mild soap and warm water. Dry immediately
with a soft, clean cloth for best results.
ROUGH-IN MEASUREMENTS
(SEE FOLLOWING PAGE)
02/03
92-2022-2

Summary of content (2 pages)