Manual

TO ORDER, PLEASE CALL 210-533-1231

Revised 12/11

SF7

SF 205FS: FULL SURFACE HINGE

SF 205G: GAP HINGE

APPLICATION

Swinging doors at cells, corridors,

plumbing chases, gates or other

locations where a higher degree of

security is required. Available in full

surface or gap type configuration.

Leaf configuration can be any

combination of solid leaf for weld-on or

pre-drilled leaf for bolt-on.

Continuous non-removable hardened

steel alloy pin. Smooth operating radial

and thrust polymer bearings.

TECHNICAL DATA

Size: 5"H x 4-1/2" W x 1/2" TK (FS)

5"H x 6" W x 1/2" TK (GAP)

Weight: 5 lbs.

Pin Size: 5/8" diameter.

Barrel Size: 1-1/2" diameter.

Barrels/Leaves: Cold rolled steel.

Finish: USP.

Exceeds all criteria for ASTM F1758 for

detention hinges for Double Weight

Grade 1.

Made in USA.

Weight capacity 800 pounds per weld-on

hinge.

NOTE: These hinges are not direct

replacements for the Folger Adam #5

Hinge or the Southern Steel 205 Hinge

due to barrel size difference.

205 HINGE

A C C E S S O R I E S

SOUTHERN FOLGER 205 HINGE

SF 205G:

GAP HINGE

SF 205FS:

FULL SURFACE HINGE

PAGE 1
A C C E S S O R I E S 205 HINGE SOUTHERN FOLGER 205 HINGE SF 205FS: FULL SURFACE HINGE SF 205G: GAP HINGE APPLICATION Swinging doors at cells, corridors, plumbing chases, gates or other locations where a higher degree of security is required. Available in full surface or gap type configuration. Leaf configuration can be any combination of solid leaf for weld-on or pre-drilled leaf for bolt-on. Continuous non-removable hardened steel alloy pin. Smooth operating radial and thrust polymer bearings.