HZ10300TX Britton Console Bar For assistance with assembly, contact: Southern Enterprises, Inc. Customer Service: 1-800-633-5096 service@seidal.com www.seidal.
Britton Console Bar Parts List Please check packaging for all parts and hardware before discarding. Before beginning assembly, separate each type of hardware. Carefully study the diagrams below and check that you have all parts indicated. Call Customer Service if missing hardware. Using the incorrect hardware will cause damage. A. Quantity of 20 Cam Bolts B. Cam Locks C. Quantity of 24 D. Wood Dowels (￠8x30) Wood Dowels E. Quantity of 32 F. Bolts G. Bolts I.
Q. Quantity of 24 Covers 1. Quantity of 1 Top Panel 2. Quantity of 1 Upper Shelf Panel 3. Quantity of 2 Side Boxes 4. Quantity of 2 Inner Side Panels 5. Quantity of 1 6. Quantity of 1 Right Front Leg Left Front Leg 7. Quantity of 1 Left Back Leg 8. Quantity of 1 Right Back Leg 9. Quantity of 1 Upper Bar Holder Panel 11. 10. Quantity of 1 Bottom Bar Holder Panel Quantity of 2 Shelf Panels 12. Quantity of 2 Upper Across Bars 13.
Britton Console Bar Assembly Instructions Insert Wood Dowel (C) into holes on Shelf Panels (11). 4 Attach Inner Side Panels (4) to Shelf Panels (11) with Bolts (E), Flat Washers (I), and Spring Washers (H). C C Tighten Bolts with Allen Wrench (J). 11 4 11 C C Figure 1 C 2 Insert Wood Dowels (C) into holes on top of Inner Side Panels (4). 4 C 4 Figure 2 Page | 4 Attach Upper Shelf Panel (2) on top of unit with Wood Dowels (C).
Secure Upper Shelf Panel (2) to Inner Side Panels (4) using Bolts (F), Flat Washers (I), and Spring Washers (H). F H 4 I J Tighten bolts with Allen Wrench (J). 2 4 Figure 3 Turn assembled unit upside-down. Attach Lower Bar Holder Panel (10) to Upper Shelf Panel (2) with Wood Dowels (C). Secure Panel (10) with Screws (K). Tighten with Phillips screwdriver. Note: Although not shown on the illustration, the back side also needs Wood Dowels and Screws to secure Panel (C).
Insert Cam Locks (B) into Upper and Lower Across Bars (12/13). Screw Cam Bolts (A) into holes on Left Front Leg (5). A 5 Attach Upper Across Bar (12) and Lower Across Bar (13) to Left Front Leg (5) using Wood Dowels (C) and Cam Bolts (A). C B Q D Tighten by rotating Cam Locks (B) clockwise with Phillips screwdriver. A C A B 13 Cover cam lock holes with Covers (Q). B 7 A Attach Side Box (3) to Left Front Leg (5) with Bolts (E), Flat Washers (I), Spring Washers (H) and Wood Dowels (D).
E H I J E H I Attach Upper Bar Holder (9) to Top Panel (1) with Bolts (E), Flat Washers (I), and Spring Washers (H). E H I 9 Tighten all bolts by Allen Wrench (J). 1 Figure 7 Insert Cam Locks (B) into holes on assembled unit from Figure 6. Screw Cam Bolts (A) into holes on Top Panel (1). 1 A A Attach Top Panel (1) to assembled unit by inserting Cam Bolts (A) into corresponding holes. A B 12 Tighten by rotating Cam Locks (B) clockwise with Phillips screwdriver.
Attach Brackets (P) to back using Screws (M). Tighten with Phillips screwdriver. I I P P Mark two desired locations on wall, same distance as Brackets (P) attached to back. N N Drill two 3/16" holes on wall and insert Plastic Anchors (L) into holes on wall (use hammer to help). Attach Brackets (P) to wall using Screws (N). Tighten with Phillips screwdriver. Figure 9 Move unit close to wall and tie Brackets (P) on wall to Brackets (P) on unit with Plastic Straps (O).
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No. Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.
