SDS

ManualsBrandsSouthern Enterprises ManualsElectric FireplacesEtta Color Changing 46 in. Electric Fireplace in Black with White and Gray

TMMQ/GPTD-PS/A00

Guangdong TIANQIU Electronics Technology Co. Ltd.

We reserve all rights for the change of product specification and any information without any prior notice.

1 / 7

TECHNICAL SPECIFICATION

FOR

MANGANESE DIOXIDE LITHIUM BATTERY

TYPE:CR2025

Document No.

TMMQ/GPTD-BPS409

Effective date

2019-11-2

Edition

Pages

Compiled

Revision

Auditing

Approved

Guangdong TIANQIU Electronics Technology Co. Ltd.

ADD: 9/F TianQiu Business Building No.16-30, He Yi Rd., San Yuan Li Ave., GuangZhou China

(Tel)：020-36322277 (Fax)：020-36323339 (P.C)：510410

(Website)：http://www.tmmq.cn (Email)：office@tmmq.com

A00

Total 7 pages

Summary of content (7 pages)

PAGE 1
TMMQ/GPTD-PS/A00 Guangdong TIANQIU Electronics Technology Co. Ltd. TECHNICAL SPECIFICATION FOR MANGANESE DIOXIDE LITHIUM BATTERY TYPE:CR2025 Document No. TMMQ/GPTD-BPS409 Effective date Edition A00 Pages Compiled Revision Auditing Approved 2019-11-2 Total 7 pages Guangdong TIANQIU Electronics Technology Co. Ltd. ADD: 9/F TianQiu Business Building No.16-30, He Yi Rd., San Yuan Li Ave., GuangZhou China (Tel)：020-36322277 (Fax)：020-36323339 (P.C)：510410 (Website)：http://www.tmmq.
PAGE 2
TMMQ/GPTD-PS/A00 Guangdong TIANQIU Electronics Technology Co. Ltd. 1． Scope This specification is applicable to the Manganese Dioxide Lithium Battery CR2025 supplied by Guangdong TIANQIU Electronics Technology Co. Ltd. 2． Designations 2.1Defining At the temperature of 20±2℃, loading at 15kΩ continuous discharge, till the voltage down to 2.0V 3． Designations and Dimensions 3.1 Designations： Manganese Dioxide Lithium Battery CR2025 3.2 Dimensions specification standard(mm) MAX MIN 2.5 2.
PAGE 3
TMMQ/GPTD-PS/A00 Guangdong TIANQIU Electronics Technology Co. Ltd. 5. Technical requirements 5.1 Test conditions Unless otherwise specified, the test conditions shall be, as a general rule, at the temperature of 20±2℃ and the relative humidity of 60±15%. 5.2 NO. 5.2.1 5.2.2 Electrical characteristics Item Test condition Sampling plan：MIL-STD-105E, General Inspection Lever Ⅱ, Single Sampling, storage AQL=0.
PAGE 4
TMMQ/GPTD-PS/A00 Guangdong TIANQIU Electronics Technology Co. Ltd. 6. Packing and marking 6.1Marking Design Any specific design and packing requirements will be accommodated as required. But as a general, the following markings will be printed, stamped or impressed on the body of the battery: We reserve all rights for the change of product specification and any information without any prior notice.
PAGE 5
TMMQ/GPTD-PS/A00 Guangdong TIANQIU Electronics Technology Co. Ltd. 6.2 date code Manufacturing marks: the year and month of product shall be marked on the negative (-) terminal side.
PAGE 6
TMMQ/GPTD-PS/A00 Guangdong TIANQIU Electronics Technology Co. Ltd. 6.3 Packing Picture We reserve all rights for the change of product specification and any information without any prior notice.
PAGE 7
TMMQ/GPTD-PS/A00 Guangdong TIANQIU Electronics Technology Co. Ltd. 7．Caution for Use 1) Since the battery is not designed to be charged, there are risks of electrolyte leakage or causing damage to the device if the battery is charged. The battery shall be installed with its “+” and “-” polarity in correct position, otherwise may cause the battery to be charged or over-discharged. 3) Short-circuiting, heating, disposing of in fire and disassembling the battery are prohibited.