Blender - Kitchen Machine User Manual

For Machines Mfg. Since 8/09 SB1024/SB1025/SB1026
-49-
MAINTENANCE
Maintenance Schedule
Each operator of this machine is responsible
for ensuring proper care of the equipment. We
strongly recommend that all operators make
a habit of following the daily maintenance
procedures.
For optimum performance from this machine,
this maintenance schedule must be strictly
followed. Use the Monthly Maintenance Chart
on Page 50 to ensure this is done.
Ongoing
To maintain a low risk of injury and proper
machine operation, if you ever observe any of the
items below shut the machine down immediately,
disconnect it from power, and fix the problem
before continuing operations.
s ,OOSEMOUNTINGBOLTSORFASTENERS
s 7ORNFRAYEDCRACKEDORDAMAGEDWIRES
s %MERGENCY34/0BUTTONNOTWORKING
correctly.
s -ISSINGBELTGUARDS
s 2EDUCTIONINBRAKINGSPEEDOREFFICIENCY
s #OOLANTNOTFLOWINGCORRECTLY
s !NYOTHERUNSAFECONDITION
Always disconnect
machine from power before
performing maintenance or
serious personal injury may
result.
!
Before Beginning Operations
s -AKESURETHEELECTRICBOXDOORISCLOSEDAND
properly latched.
s 4URNTHESPINDLEDIRECTIONSWITCHTOTHEOFF
(middle) position to prevent spindle startup
when connected to power (see Page 29).
s -OVETHESPINDLESPEEDRANGESELECTORTO
the manual (forward) position to prevent
the spindle from unexpectedly downfeeding
when rotation is started (see Page 43).
s -AKESURETHE8AXISPOWERFEEDISTURNED
OFF to prevent unintentional table
movement when connected to power (see
Page 31).
s #HECKTHECOOLANTRESERVOIRINTHEBASEFOR
fluid/debris build-up. Clean out if necessary
(see Page 56).
s 0ERFORMLUBRICATIONSTASKSASDIRECTEDINTHE
Lubrication section on Page 51.
s #HECKTABLEMOVEMENTINALLTHREEAXES
directions for loose/tight gibs. Adjust the gibs
if necessary (see Page 58).
Daily, After Operations
s 0USHTHEEMERGENCY34/0BUTTONAND
disconnect the machine from power.
s 6ACUUMCLEANALLCHIPSANDSWARFFROMTABLE
slides, and base.
s 7IPEDOWNALLUNPAINTEDORMACHINED
surfaces with a good quality rust
preventative.