Datasheet

208
In applications where similar connectors are used next to each other,
mismatching can cause disturbances, system failure or even danger to
operating personnel.
To eliminate mismatching, some Trim Trio® connectors are offered with
discrimination keys to avoid interconnection system errors. In addition,
the connector insert can also be rotated inside the shell to create custom
keying options.
Discrimination/Keying Methods
SMSPKE0 (only for UTS layouts using #16 contacts)
When one of these dummy contacts is used, the UTS connector
will only mate with a connector which has a vacant cavity at the
corresponding position.
The material used is polyamide 6.6.
SMSPKE0
Connectors with rotated inserts can be ordered by adding the suffix W, X,
Y or Z to the standard part number.
e.g.
UTS6JC104S (N key)  UTS6JC104SW (W key)
Consult us for overmoulded harnesses.
N (Normal)
Note: Insert rotated in body
(viewed from front face of male insert)
Other keys
UTS Series
|
Appendices
Shell
size
Layout
Discrimination keys degrees
W X Y Z
8
8E2/8D2 58° 122° - -
8E3/8D3
8E3A/ 8D3A
8E98/8D98
60° 210° - -
8E4/8D4 45° - - -
8E33/8D33 90° - - -
10
102W2/103 - - - -
104 45° - - -
103W3 - - - -
106
10E6/10D6
90° - - -
10E7/10D7 90° - -
10E98/
10D98
90° 180° 240° 270°
12
12E2/12D2 - - - -
12E3/12D3 - - 180° -
124
12E4/12D4
- - - -
128 26° - - -
12E8/12D8 90° 112° 203° 292°
1210
12E10/12D10
60° 155° 270° 295°
12E14/12D14 45° - - -
14
14E5/14D5 40° 92° 184° 273°
142G1 - - - -
147
14E7/14D7
- - - -
148 - - - -
1412 60° - - -
1492 49° 71° 145° -
14E12/14D12 43° 90° - -
14E15/14D15 17° 110° 155° 234°
14E18/14D18 15° 90° 180° 270°
1419 30° 165° 315° -
14E19/14D19 30° 165° 315° -
18
183G1 - - - -
18X2M3 - - - -
1823 - 158° - 270°
1832
18E32/18D32
85° 138° 222° 265°