Operation Manual

DAB100 / English Manual
6
24H Alarm 10
OFF 00:00 DAB
BBC
Time Update
Auto Update
DAB
24H Alarm 10
ON 00:00 DAB
24H Alarm 10
ON 00:00 DAB
24H Alarm 10
ON 00:00 DAB
24H Alarm 10
ON 00:00 DAB
BBC
BBC Ensemble
87.50 MHz
Auto
(
Mono
)
87.50 MHz Z
Auto
(
Mono
)
00: 59: 58
00/00/0000
select OFF to cancel the sleep timer.
TIME UPDATE
Set the TIME Auto Update from either DAB/FM mode or NO UPDATE.
Press ‘MENU’ button to choose TIME UPDATE, press ‘SELECT’ button
Press ‘UP’/’DOWN’ button to choose the mode source DAB/FM/NO UPDATE and press
‘SELECT’ button
The LCD display will show the selection mode e.g.
“DAB”
is flashing.
SET ALARM
It has a daily alarm, which switches the radio on and tunes to the station you have chosen or sounds a tone. To
set or change and alarm:
z Long press ‘ALARM’ button to enter to the alarm setting, then press ‘UP’/’DOWN’
and ‘SELECT’ button to switch the alarm
“ON”
The LCD display will show
“OFF”
is flashing
z Press ‘UP’/’DOWN’ and ‘SELECT’ button to set HOUR
The LCD display will show the time with the
“00”
is flashing
z Press ‘UP’/’DOWN’ and ‘SELECT’ button to set the MINUTE
The LCD display will show the time with the
“00”
is flashing
z Press ‘UP’/’DOWN’ and ‘SELECT’ button to set the DAB or FM radio alarm or
BUZZER alarm.
The LCD display will show the alarm type e.g.
“DAB”
is flashing
z Press ‘UP’/’DOWN’ and ‘SELECT’ button to set the ALARM VOLUME LEVEL,
The LCD display will show the alarm volume level with
“10”
is flashing
The LCD screen will confirm your settings by return the LCD display content to the previous listened station.
DAB station FM radio Buzzer
TURN OFF BUZZER/DAB/FM ALARM
Press ‘STANDBY’ button once to turn off the alarm, the unit will go back to the STANDBY mode.
NOTE: Without pressing any button, the buzzer will be automatically turned off after 59 minutes. And
then LCD display content will go back to the previous listened station / display mode.
TO SET THE SNOOZE ALARM
When an alarm is sounding, press ‘STANDBY’ button to silence the alarm for 5
minutes (the default snooze time). After 5 minutes, the alarm will sound again.
The letter ‘Z’ will appear beside the bell.
To cancel the snooze function, press ‘STANDBY’ button twice. The unit will go back to the STANDBY mode.
VIEW THE ALARM SETTING
z Press ‘ALARM’ to view the alarm setting that have been set
NOTE: To adjust the alarm setting, repeat the steps on SET ALARM menu.
FM MODE
z Press ‘MODE’ button to cycle through the menu until reach FM mode.
The first time you turn on to FM radio, it will start at ’87.5MHz’, otherwise, it will tune to the last listened station.