User's Manual

24
G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01
US02CD-U.fm
masterpage:Left
XAV-601BT
4-419-667-11(1)
Enjoying music according to
your mood — SensMe™
Sony’s unique “SensMe™ channels” feature
automatically group tracks by channel or mood,
and allow you to enjoy music intuitively.
Installing “Media Go” to your
computer
Software (“Media Go”) is required to enable the
SensMe™ function on this unit.
1 Download “Media Go” software from
the support site on the back cover.
2 Follow the on-screen instructions to
complete the installation.
Registering a USB device using
“SensMe™ Setup”
USB device registration is required to enable the
SensMe™ function on the unit.
If registration is not performed along with the
installation procedure, follow the steps below.
1 Start “SensMe™ Setup” on your
computer.
2 Connect a USB device to your
computer.
3 Complete registration following the
on-screen instructions.
Tip
If you connect a registered USB device containing
analyzed tracks, the USB device can be unregistered
again.
Transferring tracks to the USB
device using “Media Go”
To enable the SensMe™ function on this unit,
tracks need to be analyzed and transferred to the
registered USB device using “Media Go.”
1 Connect the registered USB device to
your computer.
For “WALKMAN,” connect via MTP mode.
For USB devices other than “WALKMAN,”
connect via MSC mode.
“Media Go” starts automatically.
If a message appears, follow the on-screen
instructions to proceed.
2 Drag and drop tracks from Windows
Explorer or iTunes, etc., to “Media Go.”
The analysis and transfer of tracks starts.
For details on operations, refer to the Help of
“Media Go.”
Note
The track analysis by 12 TONE ANALYSIS may take
time, depending on the computer environment.
Tip
Not only audio files but also image or video files can
be transferred using “Media Go.” For details, refer to
the Help of “Media Go.”
Playing tracks in channels
— SensMe™ channels
“SensMe™ channels” automatically group tracks
into channels by their tunes. You can select and
play a channel that fits your mood, activity, etc.
1 Connect a USB device set up for the
SensMe™ function.
2 Press (HOME), then touch “USB
Music.”
3 Touch “channels.”
The channel list appears.
4 Touch v/V to scroll the channel list.
Playback of the first track in the current
channel starts from the track’s most melodic
or rhythmical section*.
* May not be detected correctly.
5 Touch the desired channel.
Playback of tracks in the selected channel
starts.
Shuffle All
Relax
Energetic
ZAP
00US+00COV-U.book Page 24 Tuesday, January 17, 2012 6:08 PM