Microphone User Manual

Specifications
Use of wireless devices from Sony in the United States of America is regulated by the Federal
Communications Commission as described in Parts 15 and 74 of the FCC regulations.
Authorized users are thereby required to obtain an appropriate license
UTX-B2V/B2X Bodypack Transmitter UTX-H2 Handheld Microphone UTX-P1 Plug-on Transmitter
Oscillator Crystal-controlled PLL Synthesizer —
Type of emission F3E
Carrier
frequencies
U3032 566 MHz to 590 MHz, selectable from 188 frequencies (in 125-kHz steps)
U4244 638 MHz to 662 MHz, selectable from 188 frequencies (in 125-kHz steps)
CE62 798 MHz to 822 MHz, selectable from 189 frequencies (in 125-kHz steps) / 960 frequencies (in 25-kHz steps)
CE67 838 MHz to 862 MHz, selectable from 190 frequencies (in 125-kHz steps) / 960 frequencies (in 25-kHz steps)
AU66 792 MHz to 806 MHz, selectable from 102 frequencies (in 125-kHz steps) —
CN 758 MHz to 782 MHz, selectable from 188 frequencies (in 125-kHz steps) —
E 794 MHz to 806 MHz, selectable from 94 frequencies (in 125-kHz steps) —
RF power output 30mW/5mW selectable (except E model)
50 mW
10mW/2mW selectable (E model)
Antenna 1/4 wave length wire 1/4 wave length wire (internal) Integral type
Pilot tone signal 32 kHz
Frequency response 40 Hz to 18 kHz (typical) 50 Hz to 18 kHz (typical)
Reference deviation ±7 kHz (-60 dBV, 1-kHz input) ±7 kHz (94 dB SPL, 1-kHz input) ±10 kHz (-60 dBV, 1-kHz input)
Signal-to-noise ratio 60 dB or more (±7-kHz deviation at 1-kHz modulation, A-weighted) 60 dB or more (±10-kHz deviation at 1-kHz modulation,
A-weighted)
Microphone capsule
Electret condenser, omni-directional (UTX-B2V)
Electret condenser, uni-directional (UTX-B2X)
Dynamic, uni-directional
—
Audio attenuator adjustment range 0 dB to 21 dB (in 3-dB steps): Mic input 0 dB to 21 dB (in 3-dB steps) 0 dB to 21 dB (in 3-dB steps): Mic input
Audio input level MIC: -60 dBV (at 0-dB attenuator level)
LINE: +4 dBu
—
MIC: -60 dBV (at 0-dB attenuator level)
LINE: +4 dBu
Audio input connector 3-pole mini jack — XLR-3-11C type
Max. input sound pressure level — 151-dB SPL (at 21-dB attenuator level) —
Indicators LCD Operating channel number/frequency, attenuator level, RF output level (High/Low), audio input status,
transmitter battery status, and accumulated operating time
Operating channel number/frequency, attenuator
level, audio input status, RF output status, transmitter
battery status, and accumulated operating time
LED Audio input status Power status Audio input status
Power requirements DC 3.0 V (with two AA-size alkaline (LR6) batteries)
Battery life
Approx. eight hours with Sony's AA-size alkaline (LR6) batteries at 77°F (25°C) at 30-mW output (except E model)
Approx. ten hours with Sony's AA-size alkaline (LR6) batteries at 77°F (25°C) at 10-mW output (E model)
Approx. six hours with Sony’s AA-size alkaline (LR6)
batteries at
77°F (25°C) at 50-mW output
Dimensions (W x H x D) 2 1/2 × 3 1/4 × 3/4 inches (63 × 82.5 × 18.7 mm)
excluding the antennas
o
|
1 15/16 × 10 inches ( 49 x 253 mm) 1 3/4 x 4 x 1 7/16 inches (44 x 99 x 36 mm)
Weight Approx. 5.1 oz (145 g), including batteries Approx. 11 oz (308 g), including batteries Approx. 6.5 oz (185 g), including batteries
URX-P2 Portable Receiver URX-M2 Tuner Module
Oscillator Crystal-controlled PLL Synthesizer
Type of reception Space diversity
Receiving
frequencies
U3032 566 MHz to 590 MHz, selectable from 188 frequencies (in 125-kHz steps)
U4244 638 MHz to 662 MHz, selectable from 188 frequencies (in 125-kHz steps)
CE62 798 MHz to 822 MHz, selectable from 189 frequencies (in 125-kHz steps) / 960 frequencies (in 25-kHz steps)
CE67 838 MHz to 862 MHz, selectable from 189 frequencies (in 125-kHz steps) / 960 frequencies (in 25-kHz steps)
AU66 792 MHz to 806 MHz, selectable from 102 frequencies (in 125-kHz steps)
CN 758 MHz to 782 MHz, selectable from 188 frequencies (in 125-kHz steps)
E 794 MHz to 806 MHz, selectable from 94 frequencies (in 125-kHz steps)
Antenna 1/4 wave length wire
Pilot tone signal 32 kHz
RF squelch level 15 dBμ 25 dBμ
Frequency response 40 Hz to 18 kHz (typical)
Reference deviation ±5 kHz (at 1-kHz modulation)
Signal-to-noise ratio
60 dB or more (±5-kHz deviation at 1-kHz modulation, A-weighted)
Audio output connector 3-pole mini jack, unbalanced-
Audio output level -58 dBm —
Monitor output connector 5/32 inch (3.5 mm) dia., stereo mini jack —
Monitor output level 5 mW (at 16 Ω) —
Indicators LCD Operating channel number/frequency, audio output status, RF input level, tuner battery status, and
accumulated operating time
Operating channel number/frequency, audio output
status, RF input level
LED RF input status
Power requirements DC 3.0 V (with two AA-size alkaline (LR6) batteries) DC 9.0 V
Battery life Approx. six hours with Sony’s AA-size alkaline (LR6) batteries at
77°F (25°C) —
Dimensions (W x H x D) 2 1/2 x 4 1/8 x 7/8 inches (63 x 104.5 x 22 mm), excluding the antennas
2 1/4 x 1 1/16 x 4 7/8 inches (57 x 26 x 121 mm)
Weight Approx. 7.2 oz (205 g), including batteries Approx. 5.3 oz (150 g)
A-1171-A (MK10474V2)
©2009 Sony Electronics Inc. All rights reserved.
Reproduction in whole or in part without written permissions is prohibited.
Features, design, and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Sony and XDCAM EX are trademarks of Sony.
HDV and HDV logo are trademarks of Sony Corporation and Victor Company of
Japan, Limited (JVC).
Printed in USA (3/09)
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
sony.com/proaudio
click: sony.com/sonysports