Sony UBP-X800 4K Ultra HD Blu-ray™ Player

20
UBP-X800
4-687-310-41(1)
master page=left
D:\JOB\SONY
DVD\2017\SD160021\4687310411_US\060ADD.fm
x [DSD Output Mode]
[Auto]: Outputs DSD signal from HDMI OUT
jack when playing Super Audio CD & DSD
format file (if the connected device also
supports DSD).
Outputs LPCM signal from HDMI OUT jack
when playing Super Audio CD & DSD format
file (if the connected device does not support
DSD).
[Off]
: Outputs PCM signals from HDMI OUT
jack when playing Super Audio CD and DSD
format file.
b
This function is disabled during connection with
a Bluetooth device. Audio format may be
changed during Bluetooth connection.
x [BD Audio MIX Setting]
[On]
: Outputs the audio obtained by mixing
the interactive and secondary audio to the
primary audio.
[Off]: Outputs the primary audio only. Select
this to output Bitstream (Dolby/DTS) signals
to an AV amplifier (receiver).
z
To enjoy Bitstream (Dolby/DTS) signals, set [BD
Audio MIX Setting] to [Off] and [Digital Audio
Output] to [Auto].
x [DTS Neo:6]
[Cinema]/[Music]: Outputs the simulated
multi-channel sound from 2 channel sources
via the HDMI OUT jack according to the
capability of the connected device using
[Cinema]/[Music] mode.
[Off]
: Outputs the sound with its original
number of channels via the HDMI OUT jack.
b
When [DTS Neo:6] is set to [Cinema] or [Music],
[DSEE HX] cannot be set to [On].
x [48kHz/96kHz/192kHz PCM]
[48kHz]
/[96kHz]/[192kHz]: Sets the sampling
frequency for the PCM signals output from
the DIGITAL OUT (COAXIAL) jack.
b
Some device does not support [96kHz] and
[192kHz] sampling frequency.
x [DSEE HX]
[On]: Upscales the audio file to a High-
Resolution Audio file and reproduces the
clear high-range sound which is often lost.
[Off]
: Turns off the function.
b
Source must be 2ch and 44.1/48 kHz.
x [Audio DRC]
[Auto]
: Performs playback at the dynamic
range specified by the disc (BD-ROM only).
Other discs are played back at the [On] level.
[On]: Performs playback at a standard
compression level.
[Off]: No compression works. A more
dynamic sound is produced.
x [Downmix]
[Surround]: Outputs audio signals with
surround effects. Select this when connecting
an audio device that supports Dolby
Surround (Pro Logic) or DTS Neo:6.
[Stereo]
: Outputs audio signals without
surround effects. Select this when connecting
an audio device that does not support Dolby
Surround (Pro Logic) or DTS Neo:6.
[Bluetooth Settings]
For “Listening to Audio through a
BLUETOOTH® Device”, see page 15.
x [Bluetooth Mode]
[On]
: Enables Bluetooth settings and
functions.
[Off]: Disables Bluetooth settings and
functions.
x [Device List]
Displays a list of paired and detected
Bluetooth receivers when [Bluetooth Mode]
is set to [On].