Operating Instructions FM Stereo FM-AM Receiver STR-DE705, STR-DE605, STR-D650Z, STR-D550Z

Receiver Operations

Recording on a video tape

You can record from a VCR, a TV, or an LD player

using the receiver. You can also add audio from a

variety of audio sources when editing a video tape. See

your VCR or LD player’s instruction manual if you

need help.

1 Press one of the function buttons to select the

program source to be recorded.

2 Set the component to be ready for playing.

For example, insert the laser disc you want to

record from into the LD player.

3 Insert a blank video tape into the VCR (VIDEO 1

or VIDEO 2) for recording.

4 Start recording on the recording VCR and then

start playing the video tape or laser disc you want

to record.

You can replace audio while copying a video tape or

laser disc

At the point you want to start adding different sound,

press another function button (for example, CD) and

start playback. The sound from the selected component

will be recorded over the original audio.

To resume recording the sound of the original playback

source, press the function button for that component.

Using the Sleep Timer

You can set the receiver to turn off automatically at a

time you specify.

Press SLEEP on the remote while the power is on.

Each time you press SLEEP, the time changes as shown

below.

The display dims after you specify the time.

You can freely specify the time

Press SLEEP first, then specify the time you want using

the digital processing control ( or ) buttons. The

sleep time changes in 1 minute intervals. You can

specify up to 5 hours.

You can check the time remaining before the

receiver turns off

Press SLEEP. The remaining time appears in the

display.



SLEEP

n 2:00:00 n 1:30:00n 1:00:00 n 0:30:00 n OFF