- SONY FM Stereo FM-AM Receiver Operating Instruction

Additional Information
71
GB
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO
(Except for models of area code CEL, CEK):
Y: 1 Vp-p, 75 ohms
B-Y: 0.7 Vp-p, 75 ohms
R-Y: 0.7 Vp-p, 75 ohms
General
Power requirements
Area code Power requirements
U, CA 120 V AC, 60 Hz
CEL, CEK 230 V AC, 50/60 Hz
SP 220 – 230 V AC, 50/60 Hz
E 120/220/240 V AC, 50/60 Hz
KR 220 – 230 V AC, 60 Hz
Power consumption
Area code Power consumption
U 290 W
CA 340 VA
CEL, CEK 300 W
SP, E, KR 300 W
Power consumption (during standby mode)
0.8 W (when “POWER SAVE” in the CUSTOMIZE
menu is set to “OFF”)/0.5 W (“ON”)
AC outlets
Area code AC outlets
U, CA 2 switched, 120 W/1A MAX
SP, CEL, CEK 1 switched, 100 W MAX
E 2 switched, 100 W MAX
Dimensions 430 × 161 × 400 mm
including projecting parts
and controls
Mass (Approx.) 13.3 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Models of area code U, CA;
Audio/video/control S cord (1)
Control S cord (mini jack) (1)
Remote commander RM-PG411 (1)
R6 (size-AA) batteries (2)
Models of other area codes;
Remote commander RM-LP211 (1)
R6 (size-AA) batteries (3)
For details on the area code of the component you
are using, see page 3.
Design and specifications are subject to change
without notice.