- SONY FM Stereo FM-AM Receiver Operating Instruction

Other Operations
63
GB
Basic Functions
The CONTROL A1 functions will operate as
long as the component you want to operate is
turned on, even if all of the other connected
components are not turned on.
x Automatic function selection
When you connect a CONTROL A1
compatible Sony amplifier (or receiver) to
other Sony components using monaural mini-
plug cords, the function selector on the
amplifier (or receiver) automatically switches
to the correct input when you press the play
button on one of the connected components.
Notes
• You must connect a CONTROL A1 compatible
amplifier (receiver) using a monaural mini-plug
cord in order to take advantage of the automatic
function selection feature.
• This function only works when the components are
connected to the amplifier (or receiver) inputs
according to the names on the function buttons.
Certain receivers allow you to switch the names of
the function buttons. In this case, refer to the
operating instructions supplied with the receiver.
• When recording, do not play any components other
than the recording source. It will cause the
automatic function selection to operate.
On CONTROL A1 jacks and connections
It is possible to make connections between
CONTROL A1 and CONTROL A1 jacks. For
details regarding particular connections or set up
options, refer to the operating instructions supplied
with the component(s).
About the connecting cord
Some CONTROL A1 compatible components are
supplied with a connecting cord as an accessory. In
this case, use the connecting cord for your
connection.
When using a commercially available cord, use a
monaural (2P) mini-plug cord less than
2 meters long, with no resistance.
CONTROL A1
Jacks and connection examples
CONTROL A1
CD player
MD deck
continued