user manual

45
US
D:\NORM'S JOB\SONY HA\SO130039\STR-DN1030_PMRF
06\4420297142_US\US04GET_STR-DN1030-CEL.fm
masterpage: Right
STR-DN1030
4-420-297-14(2)
Preparing the Receiver
Searching for an access point
and setting up a wireless
network (Access Point Scan
method)
You can set up a wireless network by
searching for an access point. To set up the
network using this connection method, you
will be required to select or enter the following
information. Check the following information
in advance, and record it in the space provided
below.
The network name (SSID
*1
) that
identifies your network
*2
. (This will be
needed in step 7.)
:
If your wireless home network is
secured by encryption, the security key
(WEP key, WPA/WPA2 key) for your
network
*2
. (This will be needed in step
8.)
:
*1
SSID (Service Set Identifier) is a name that
identifies a particular access point.
*2
This information should be available from a label
on your wireless LAN router/access point, from
the operating instructions, from the person who
set up your wireless network, or from the
information provided by your Internet service
provider.
1 Press MENU.
The menu is displayed on the TV screen.
2 Press V/v repeatedly to select
“ Settings”, then press or
b.
3 Press V/v repeatedly to select
“Network”, then press .
4 Press V/v repeatedly to select
“Settings”, then press .
5 Press V/v repeatedly to select
“Wireless LAN Settings”, then
press .
If “Change Setting?” appears on the TV
screen, select “OK”, then press .
6 Press V/v repeatedly to select
“Access Point Scan”, then
press .
The receiver starts searching for access
points, and displays a list of up to 30
available network name (SSID).
7 Press V/v repeatedly to select
the network name (SSID) you
want, then press .
The security setting display appears on
the TV screen.
8 Enter the security key (WEP
key, WPA/WPA2 key), then
press .
By default, the security key appears as
“*****”. Press DISPLAY repeatedly to
encrypt and disclose the security key.
“IP Settings” appears on the TV screen.
9 Press V/v repeatedly to select
“Auto”, then press .
The proxy setting display appears on the
TV screen.
V/v/B/b,
MENU
DISPLAY
continued