User's Manual

35
Using the Menus
PICTURE SETTING Menu
The PICTURE SETTING menu is used for adjusting the picture.
Picture Mode Standard
Adjust Picture...
PICTURE SETTING
Input A
PICTURE SETTING
Contrast: 80
Brightness: 50
Gamma Mode: Off
Color Temp.: High
ADJUST PICTURE Standard
Input-A
Setting items Functions Initial setting
Picture Mode You can select the picture viewing mode that best
suits the type of picture or the environment.
Dynamic: Select this for bright picture suitable for
viewing it in a bright room.
Standard: Select this for more natural picture than
the picture with the Dynamic setting.
Cinema: Select this for watching movies, etc. in a
dark environment.
User 1, User 2, User 3: You can adjust the quality of
the picture to suit your taste and then store the
settings. Once the settings are stored, you can view
the picture with the adjusted picture quality by
pressing PICTURE MODE on the remote control.
To store the settings
1 Select User 1, User 2, or User 3.
2 Adjust the items you want in the menus.
Tips
• You can also adjust the picture quality in
“Dynamic”, “Standard” or “Cinema”, and store the
settings. To reset everything to the factory settings,
select “Picture Mode,” and press RESET on the
remote control.
• Some items may not be displayed in the PICTURE
SETTING menu, depending on the type of input
signal. For details, see “Input Signals and
Adjustable/Setting Items” (1 page 45).
Set according to
the input signal
Adjust Picture... The projector can store the setting values of the following menu items for
each picture mode separately.
Contrast Adjusts the white area of pictures (white level).
The higher the setting, the greater the contrast. The
lower the setting, the lower the contrast.
You can make adjustments by pressing
CONTRAST+/– on the remote control.
80