User's Manual

22
The SET SETTING Menu
*1: Executes APA when a computer signal is input via the RGB input connector (INPUT A/INPUT
B (INPUT B is available only for VPL-SX125)).
*2: If the projected image includes large amount of black portion around it, the APA function will
not work properly and a part of the image may not be displayed on the screen and also optimum
image cannot be obtained, depending on the type of input signal. In this case, adjust the “Dot
Phase,” “H size,” and “Shift” items manually.
*3: The image may not be adjusted properly depending on the type of input signal. In such a case,
adjust it manually to suit to the connected equipment.
*4: “Network Setting” is not displayed while “REMOTE” is selected from “External Control” in the
INSTALL SETTING menu.
Notes