User's Guide
Table Of Contents
- Table of Contents
- Overview
- Preparation
- Operating the Camera
- Administrator and User
- Logging in to System
- Configuration of Main Viewer
- Main menu
- Control panel section
- Monitor image
- Plug-in free viewer
- Using SolidPTZ function
- Controlling via the control panel (Operation common to Area zoom mode and Vector dragging mode)
- Panning and tilting by clicking the monitor image (Area zoom mode only)
- Panning, tilting and zooming by specifying the area (Area zoom mode only)
- Panning and tilting by dragging the screen (Vector dragging mode only)
- Moving the camera to a preset position (Common operations in Area zoom and Vector dragging modes)
- Using pan/tilt/zoom operations with the displayed control bar (PTZ Control bar only)
- Controlling the Camera on a Full Image
- Using the Trigger Button
- Switching Transmission Mode
- Using the System Utility
- Administrating the Camera
- Basic Operations of the Administrator Menu
- Configuring the System - System Menu
- Setting the Camera Image - Camera Menu
- Configuring the Network - Network Menu
- Setting the SSL function - SSL Menu
- Using the 802.1X Authentication Function - 802.1X Menu
- Setting the User - User Menu
- Setting the Security - Security Menu
- Saving the Camera Position and Action - Preset position Menu
- Sending an Image via E-mail - e-Mail (SMTP) Menu
- Sending Images to FTP Server - FTP client Menu
- Setting the Alarm Output - Alarm output Menu (SNC-CH115/CH120/CH160/CH220/CH260/DH120T/DH160/DH220T/DH260/EB520/EM521/ZB550/ZM551)
- Setting the Operations from the Viewer - Trigger Menu
- Setting the Schedule - Schedule Menu
- Setting the Sensor input/Camera tampering detection/Motion detection - Event detection Menu
- Configuring the Viewer - Viewer Menu
- Others
SNC CH115/CH120/CH160/CH220/CH260
Administrating the Camera
Setting the Camera Image — Camera Menu
40
Frame rate
Set the frame rate of the image.
Selectable frame rates are as follows:
1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 16, 20, 25, 30 (fps)
“fps” is a unit indicating the number of frames
transmitted per second.
Configurable frame rates are as follows:
The frame rate of JPEG image can be changed by the
setting of Image quality.
SNC-EB520/EM520/EM521
Image size [800 × 600]
SNC-CH115/CH120/CH160/DH120/DH120T/
DH160/ZB550/ZM550/ZM551
Image size [1280 × 720]
Image size [1280 × 1024]
SNC-CH220/CH260/DH220/DH220T/DH260
When image size of image 1 is “1920 × 1080”; the
image size of image 2 is “640 × 480”
When image size of image 1 is “1920 × 1440”; the
image size of image 2 is “640 × 480”
Bit rate
Set the bit rate of MPEG4 or H.264 image transmission
for a line. When the bit rate is set to a high level, better
image quality can be enjoyed.
720
×
576 a ×
704
×
576 a ×
720
×
480 a ×
640
×
480 aa
640
×
368 × f
384
×
288 aa
320
×
240 aa
320
×
192 × f
Image 1 Image 2
Codec Frame rate
(fps)
Codec Frame rate
(fps)
Single
codec
H.264 30 -
MPEG4 30 -
JPEG 30 -
Dual codec
H.264 30 H.264 25
H.264 30 JPEG 25
H.264 30 MPEG4 30
MPEG4 30 MPEG4 30
MPEG4 30 JPEG 25
JPEG 30 JPEG 25
Image 1 Image 2
Codec Frame rate
(fps)
Codec Frame rate
(fps)
Single
codec
H.264 30 -
MPEG4 30 -
JPEG 30 -
Dual codec
H.264 25 H.264 5
H.264 25 JPEG 10
H.264 25 MPEG4 6
MPEG4 30 MPEG4 10
MPEG4 30 JPEG 16
JPEG 30 JPEG 30
Image 1 Image 2
Codec Frame rate
(fps)
Codec Frame rate
(fps)
Single
codec
H.264 20 -
MPEG4 25 -
JPEG 30 -
Dual codec
H.264 15 H.264 6
H.264 15 JPEG 12
H.264 15 MPEG4 8
MPEG4 20 MPEG4 8
MPEG4 25 JPEG 6
JPEG 30 JPEG 12
Image 1 Image 2
Codec Frame rate
(fps)
Codec Frame rate
(fps)
Single
codec
H.264 30 -
MPEG4 20 -
JPEG 16 -
Dual codec
H.264 25 H.264 20
H.264 25 JPEG 30
H.264 25 MPEG4 25
MPEG4 20 MPEG4 30
MPEG4 20 JPEG 30
JPEG 16 JPEG 30
Image 1 Image 2
Codec Frame rate
(fps)
Codec Frame rate
(fps)
Single
codec
H.264 20 -
MPEG4 16 -
JPEG 12 -
Dual codec
H.264 20 H.264 12
H.264 20 JPEG 30
H.264 20 MPEG4 16
MPEG4 15 MPEG4 30
MPEG4 15 JPEG 30
JPEG 12 JPEG 30