Operating Instructions
Table Of Contents
-  WARNING
- Compliance Information
- Before first use
- Connection/Installation
- Preparing the app and the batteries
- Mounting the RTK kit on the aircraft and assembling the aircraft
- Installing the base station
- Preparing the remote controller and the aircraft
- Preparing a camera
- Mounting the gimbal on the aircraft
- Mounting a camera on the gimbal (when using the GBL-PX1)
- Mounting a camera on the gimbal (when using the GBL-T3)
- Settings/Operation
- Storing
- Flight Information and Specifications
- Compliance Information
38
3 Remove the hot shoe attachment from the hot shoe cable included
with this product.
¼
Hint
The hot shoe attachment is a part used when mounting the camera on the gimbal GBL-T3. Store the hot shoe
attachment securely so as not to lose it.
4 Attach the hot shoe cable to the camera.
Hot shoe cable
5 Connect the hot shoe cable to the gimbal.
Insert the other end of the hot shoe cable attached to the camera in the gimbal SYNC port.